- 密度 [g/cm3]: 1.21
- 吸水率 [%]: 0.14
- 缺口冲击强度: 0.534
- 断裂伸长率 [%]: 128
- 弯曲强度 [MPa]: 93.1
- 弯曲模量 [MPa]: 6.21
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.21 - 1.36 g/cc | 0.0437 - 0.0491 lb/in³ | Average value: 1.28 g/cc Grade Count:4 |
| Filler Content | 10.0 - 40.0 % | 10.0 - 40.0 % | Average value: 25.0 % Grade Count:4 |
| Water Absorption | 0.140 - 0.210 % | 0.140 - 0.210 % | Average value: 0.170 % Grade Count:4 |
| Linear Mold Shrinkage | 0.000100 - 0.00100 cm/cm | 0.000100 - 0.00100 in/in | Average value: 0.000425 cm/cm Grade Count:4 |
| Linear Mold Shrinkage, 6.35 mm section | 0.000300 - 0.00200 cm/cm | 0.000300 - 0.00200 in/in | Average value: 0.00133 cm/cm Grade Count:4 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 93.1 - 145 MPa | 13500 - 21000 psi | Average value: 122 MPa Grade Count:4 |
| Elongation at Break | 1.20 - 2.30 % | 1.20 - 2.30 % | Average value: 1.73 % Grade Count:4 |
| Modulus of Elasticity | 7.65 - 24.1 GPa | 1110 - 3500 ksi | Average value: 15.5 GPa Grade Count:4 |
| Flexural Yield Strength | 128 - 207 MPa | 18500 - 30000 psi | Average value: 169 MPa Grade Count:4 |
| Flexural Modulus | 6.21 - 21.4 GPa | 900 - 3100 ksi | Average value: 13.4 GPa Grade Count:4 |
| Izod Impact, Notched | 0.534 - 0.854 J/cm | 1.00 - 1.60 ft-lb/in | Average value: 0.667 J/cm Grade Count:4 |
| Izod Impact, Unnotched | 3.20 - 3.74 J/cm | 6.00 - 7.00 ft-lb/in | Average value: 3.60 J/cm Grade Count:4 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00 - 100 ohm-cm | 1.00 - 100 ohm-cm | Average value: 25.8 ohm-cm Grade Count:4 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 129 - 132 °C | 265 - 270 °F | Average value: 132 °C Grade Count:4 |
| Flammability, UL94 | HB | HB | Grade Count:3 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 202 - 249 °C | 395 - 480 °F | Average value: 225 °C Grade Count:4 |
| Mold Temperature | 32.2 - 65.6 °C | 90.0 - 150 °F | Average value: 48.9 °C Grade Count:4 |
| Injection Pressure | 55.2 - 82.7 MPa | 8000 - 12000 psi | Average value: 68.9 MPa Grade Count:4 |