Overview of materials for Acrylic, High Flow, Molded

Overview of materials for Acrylic, High Flow, Molded 物性表: Overview of materials for Acrylic, High Flow, Molded物性表及特性介绍,Overview of materials for Acrylic, High Flow, Molded注塑参数详情,如需Overview of materials for Acrylic, High Flow, Molded下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 3.3
  • 密度 [g/cm3]: 1.15
  • 吸水率 [%]: 0.29
  • 缺口冲击强度: 0.147
  • 拉伸强度 [MPa]: 60.7
  • 断裂伸长率 [%]: 71.0
  • 弯曲强度 [MPa]: 37.9
  • 弯曲模量 [MPa]: 1.86
  • 热变形温度 [℃]: 80.0
  • 透光率 [%]: 90.0
 
Physical PropertiesMetricEnglishComments
Density 1.15 - 1.19 g/cc0.0415 - 0.0430 lb/in³Average value: 1.18 g/cc Grade Count:11
Water Absorption 0.290 - 0.400 %0.290 - 0.400 %Average value: 0.311 % Grade Count:8
Linear Mold Shrinkage 0.00200 - 0.00800 cm/cm0.00200 - 0.00800 in/inAverage value: 0.00420 cm/cm Grade Count:10
Melt Flow 3.30 - 35.0 g/10 min3.30 - 35.0 g/10 minAverage value: 17.6 g/10 min Grade Count:10
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 38.0 - 94.038.0 - 94.0Average value: 77.3 Grade Count:8
Tensile Strength, Ultimate 37.9 - 67.0 MPa5500 - 9720 psiAverage value: 59.1 MPa Grade Count:7
Tensile Strength, Yield 60.7 - 68.0 MPa8800 - 9860 psiAverage value: 64.6 MPa Grade Count:4
Elongation at Yield 5.00 - 10.0 %5.00 - 10.0 %Average value: 7.00 % Grade Count:4
Modulus of Elasticity 1.86 - 3.10 GPa270 - 450 ksiAverage value: 2.80 GPa Grade Count:8
Flexural Yield Strength 71.0 - 115 MPa10300 - 16700 psiAverage value: 97.9 MPa Grade Count:10
Flexural Modulus 1.86 - 3.24 GPa270 - 469 ksiAverage value: 2.80 GPa Grade Count:8
Izod Impact, Notched 0.147 - 0.481 J/cm0.276 - 0.900 ft-lb/inAverage value: 0.259 J/cm Grade Count:10
 
Thermal PropertiesMetricEnglishComments
Thermal Conductivity 0.187 - 0.216 W/m-K1.30 - 1.50 BTU-in/hr-ft²-°FAverage value: 0.195 W/m-K Grade Count:6
Deflection Temperature at 0.46 MPa (66 psi) 80.0 - 89.0 °C176 - 192 °FAverage value: 84.3 °C Grade Count:7
Deflection Temperature at 1.8 MPa (264 psi) 76.1 - 93.9 °C169 - 201 °FAverage value: 82.0 °C Grade Count:9
Vicat Softening Point 81.1 - 102 °C178 - 216 °FAverage value: 89.5 °C Grade Count:10
 
Optical PropertiesMetricEnglishComments
Refractive Index 1.49 - 1.491.49 - 1.49Average value: 1.49 Grade Count:11
Haze 0.300 - 2.00 %0.300 - 2.00 %Average value: 1.38 % Grade Count:10
Transmission, Visible 90.0 - 93.0 %90.0 - 93.0 %Average value: 92.1 % Grade Count:11

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-29848.html

免责声明: 本文 Overview of materials for Acrylic, High Flow, Molded 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4