- 熔体流动速率 [g/10min]: 25.0
- 密度 [g/cm3]: 0.9
- 拉伸强度 [MPa]: 20.0
- 热变形温度 [℃]: 63.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 0.900 g/cc | 0.0325 lb/in³ | ISO 1183 | ||
| Linear Mold Shrinkage | 0.010 - 0.020 cm/cm | 0.010 - 0.020 in/in | |||
| Melt Flow | 25 g/10 min @Load 2.16 kg, Temperature 230 °C | 25 g/10 min @Load 4.76 lb, Temperature 446 °F | ISO 1133 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 62 | 62 | ISO 868 | ||
| Tensile Strength, Yield | 20.0 MPa | 2900 psi | 50mm/min; ISO 527-2 | ||
| Elongation at Yield | 14 % | 14 % | 50mm/min; ISO 527-2 | ||
| Tensile Modulus | 0.600 GPa | 87.0 ksi | 1mm/min; ISO 527-2 | ||
| Charpy Impact, Notched | 0.500 J/cm² @Temperature 0.000 °C | 2.38 ft-lb/in² @Temperature 32.0 °F | ISO 179/1eA | ||
| 1.20 J/cm² @Temperature 23.0 °C | 5.71 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | |||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 63.0 °C | 145 °F | ISO 75-2 | ||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 210 - 250 °C | 410 - 482 °F | |||
| Mold Temperature | 15.0 - 50.0 °C | 59.0 - 122 °F | |||
| Descriptive Properties | |||||
| Injection Velocity | high | ||||