Overview of materials for Epoxy, High Temperature

Overview of materials for Epoxy, High Temperature 物性表: Overview of materials for Epoxy, High Temperature物性表及特性介绍,Overview of materials for Epoxy, High Temperature注塑参数详情,如需Overview of materials for Epoxy, High Temperature下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.99
  • 吸水率 [%]: 0.2
  • 缺口冲击强度: 0.155
  • 断裂伸长率 [%]: 81.4
  • 弯曲强度 [MPa]: 13.8
  • 透光率 [%]: 0.1
 
Physical PropertiesMetricEnglishComments
Density 0.990 - 2.45 g/cc0.0358 - 0.0885 lb/in³Average value: 1.27 g/cc Grade Count:29
Solids Content 100 %100 %Average value: 100 % Grade Count:3
Water Absorption  0.200 - 0.200 %
@Temperature 50.0 - 50.0 °C
0.200 - 0.200 %
@Temperature 122 - 122 °F
Average value: 0.200 % Grade Count:1
 0.200 - 0.200 %
@Time 173000 - 173000 sec
0.200 - 0.200 %
@Time 48.0 - 48.0 hour
Average value: 0.200 % Grade Count:1
Particle Size 20.0 - 45.0 µm20.0 - 45.0 µmAverage value: 25.0 µm Grade Count:9
Viscosity 30.0 - 1.00e+6 cP30.0 - 1.00e+6 cPAverage value: 46400 cP Grade Count:44
 150 - 1800 cP
@Temperature 52.0 - 82.2 °C
150 - 1800 cP
@Temperature 126 - 180 °F
Average value: 767 cP Grade Count:3
Storage Temperature 4.44 - 32.2 °C40.0 - 90.0 °FAverage value: 21.7 °C Grade Count:5
 
Chemical PropertiesMetricEnglishComments
Ionic Impurities - Na (Sodium) 9.00 - 143 ppm9.00 - 143 ppmAverage value: 47.2 ppm Grade Count:5
Ionic Impurities - K (Potassium) 3.00 - 16.0 ppm3.00 - 16.0 ppmAverage value: 9.60 ppm Grade Count:5
Ionic Impurities - Cl (Chloride) 26.0 - 595 ppm26.0 - 595 ppmAverage value: 282 ppm Grade Count:6
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore D 40.0 - 96.040.0 - 96.0Average value: 80.0 Grade Count:30
 20.0 - 27.0
@Temperature 100 - 177 °C
20.0 - 27.0
@Temperature 212 - 350 °F
Average value: 23.0 Grade Count:2
Tensile Strength, Ultimate 13.8 - 85.0 MPa2000 - 12300 psiAverage value: 62.3 MPa Grade Count:11
 >= 13.7895 MPa
@Temperature 60.0 - 60.0 °C
>= 2000.00 psi
@Temperature 140 - 140 °F
Average value: 13.8 MPa Grade Count:1
Elongation at Break 1.00 - 50.0 %1.00 - 50.0 %Average value: 9.14 % Grade Count:7
 >= 30.0 %
@Temperature 60.0 - 60.0 °C
>= 30.0 %
@Temperature 140 - 140 °F
Average value: 30.0 % Grade Count:1
Modulus of Elasticity 1.68 - 5.40 GPa244 - 783 ksiAverage value: 3.00 GPa Grade Count:22
 0.827371 - 0.827371 GPa
@Temperature 60.0 - 60.0 °C
120.002 - 120.002 ksi
@Temperature 140 - 140 °F
Average value: 0.827 GPa Grade Count:1
Flexural Yield Strength 81.4 - 160 MPa11800 - 23200 psiAverage value: 117 MPa Grade Count:5
Compressive Yield Strength 55.2 - 256 MPa8000 - 37100 psiAverage value: 182 MPa Grade Count:7
Shear Strength 4.83 - 46.9 MPa700 - 6800 psiAverage value: 20.2 MPa Grade Count:22
Adhesive Bond Strength 16.5 - 27.6 MPa2400 - 4000 psiAverage value: 21.6 MPa Grade Count:3
Izod Impact, Notched 0.155 - 0.481 J/cm0.290 - 0.900 ft-lb/inAverage value: 0.286 J/cm Grade Count:4
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 400 - 1.00e+16 ohm-cm400 - 1.00e+16 ohm-cmAverage value: 8.53e+14 ohm-cm Grade Count:26
Dielectric Constant 2.58 - 5.202.58 - 5.20Average value: 3.63 Grade Count:27
Dielectric Strength 14.7 - 17.7 kV/mm373 - 450 kV/inAverage value: 16.2 kV/mm Grade Count:6
Dissipation Factor 0.00300 - 0.01400.00300 - 0.0140Average value: 0.00658 Grade Count:19
 
Thermal PropertiesMetricEnglishComments
CTE, linear 17.0 - 231 µm/m-°C9.44 - 128 µin/in-°FAverage value: 102 µm/m-°C Grade Count:30
 >= 75.0 µm/m-°C
@Temperature 60.0 - 60.0 °C
>= 41.7 µin/in-°F
@Temperature 140 - 140 °F
Average value: 75.0 µm/m-°C Grade Count:1
Thermal Conductivity 0.167 - 1.44 W/m-K1.16 - 10.0 BTU-in/hr-ft²-°FAverage value: 0.833 W/m-K Grade Count:12
Maximum Service Temperature, Air 149 - 350 °C300 - 662 °FAverage value: 259 °C Grade Count:53
Minimum Service Temperature, Air -269 - -20.0 °C-452 - -4.00 °FAverage value: -58.8 °C Grade Count:45
Glass Transition Temp, Tg -120 - 220 °C-184 - 428 °FAverage value: 98.3 °C Grade Count:23
Decomposition Temperature 341 - 487 °C646 - 909 °FAverage value: 405 °C Grade Count:17
 
Optical PropertiesMetricEnglishComments
Refractive Index 1.52 - 1.621.52 - 1.62Average value: 1.57 Grade Count:9
Transmission, Visible 0.100 - 99.0 %0.100 - 99.0 %Average value: 77.4 % Grade Count:11
 
Processing PropertiesMetricEnglishComments
Processing Temperature 10.0 - 177 °C50.0 - 350 °FAverage value: 73.0 °C Grade Count:3
Cure Time 20.0 - 4320 min0.333 - 72.0 hourAverage value: 675 min Grade Count:27
 1.00 - 480 min
@Temperature 80.0 - 204 °C
0.0167 - 8.00 hour
@Temperature 176 - 400 °F
Average value: 43.3 min Grade Count:23
Pot Life 8.00 - 7200 min8.00 - 7200 minAverage value: 712 min Grade Count:30
Shelf Life 3.00 - 12.0 Month3.00 - 12.0 MonthAverage value: 10.4 Month Grade Count:27

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-32201.html

免责声明: 本文 Overview of materials for Epoxy, High Temperature 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4