Abatron AboCast/AboCure 8109-9

Abatron AboCast/AboCure 8109-9 物性表: Abatron AboCast/AboCure 8109-9物性表及特性介绍,Abatron AboCast/AboCure 8109-9注塑参数详情,如需Abatron AboCast/AboCure 8109-9下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.17
  • 吸水率 [%]: 0.5
  • 断裂伸长率 [%]: 110.3
  • 弯曲强度 [MPa]: 62.05
 
Physical PropertiesMetricEnglishComments
Density 1.17 g/cc0.0423 lb/in³
Water Absorption 0.50 - 0.60 %0.50 - 0.60 %(60x10X4 mm bar) after 10 days at 20°C (77°F)
 0.70 - 0.80 %0.70 - 0.80 %(60x10X4 mm bar) after 1 hour at 100°C (212°F)
Viscosity 6500 - 8000 cP6500 - 8000 cP
Vapor Pressure <= 0.0000133 bar<= 0.0100 torrAboCure, at 20°C
 0.00133 bar1.00 torrAboCast, at 180°C
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 62.05 MPa9000 psi
Modulus of Elasticity 3.102 GPa449.9 ksi
Flexural Yield Strength 110.3 MPa16000 psi
Compressive Yield Strength 103.4 MPa15000 psi
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity >= 1.50e+16 ohm-cm>= 1.50e+16 ohm-cm
Dielectric Constant  3.7 - 4.1
@Frequency 1e+6 Hz
3.7 - 4.1
@Frequency 1e+6 Hz
 4.5 - 4.8
@Frequency 50 Hz
4.5 - 4.8
@Frequency 50 Hz
Dissipation Factor  0.010 - 0.020
@Frequency 50 Hz
0.010 - 0.020
@Frequency 50 Hz
 0.030 - 0.040
@Frequency 1e+6 Hz
0.030 - 0.040
@Frequency 1e+6 Hz
 
Thermal PropertiesMetricEnglishComments
CTE, linear 65.0 - 70.0 µm/m-°C
@Temperature 20.0 °C
36.1 - 38.9 µin/in-°F
@Temperature 68.0 °F
Maximum Service Temperature, Air 110 °C230 °FDeflection temperature; load unknown.
 
Processing PropertiesMetricEnglishComments
Processing Temperature 25.0 °C77.0 °F
Pot Life 10 min10 minat 60°C (140°F)
 20 min20 minat 40°C (104°F)
 45 min45 minat 20°C (68°F)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-32400.html

免责声明: 本文 Abatron AboCast/AboCure 8109-9 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4