- 吸水率 [%]: 0.1
- 弯曲强度 [MPa]: 48.3
- 弯曲模量 [MPa]: 9.65
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.75 g/cc | 1.75 g/cc | ASTM D792 |
| Water Absorption | 0.10 % | 0.10 % | ISO 62 |
| Linear Mold Shrinkage | 0.00070 cm/cm | 0.00070 in/in | ISO 2577 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 48.3 MPa | 7000 psi | ISO 527 |
| Tensile Modulus | 11.7 GPa | 1700 ksi | tangent; ISO 527 |
| Flexural Strength | 121 MPa | 17500 psi | ISO 178 |
| Flexural Modulus | 9.65 GPa | 1400 ksi | Tangent; ISO 178 |
| Poissons Ratio | 0.274 | 0.274 | ISO 527-1 |
| Shear Modulus | 4.59 GPa | 666 ksi | Calculated |
| Izod Impact, Unnotched | 6.41 J/cm | 12.0 ft-lb/in | ASTM D4812 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Transverse to Flow | 27.0 µm/m-°C @Temperature 20.0 °C | 15.0 µin/in-°F @Temperature 68.0 °F | XY-direction; ASTM D696 |
| Specific Heat Capacity | 1.51 J/g-°C | 0.360 BTU/lb-°F | ASTM D1269E |
| Thermal Conductivity | 0.401 W/m-K | 2.78 BTU-in/hr-ft²-°F | ASTM D177 |
| Deflection Temperature at 1.8 MPa (264 psi) | 271 °C | 520 °F | ISO 75 |
| Glass Transition Temp, Tg | 188 °C | 370 °F | ASTM D4065-01 |