- 缺口冲击强度: 7.5
- 弯曲模量 [MPa]: 9.00
Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.70 - 1.85 g/cc | 1.70 - 1.85 g/cc | |
Linear Mold Shrinkage | 0.00050 - 0.0020 cm/cm | 0.00050 - 0.0020 in/in | Polymerization Shrinkage |
Mechanical Properties | Metric | English | Comments |
Tensile Strength | 65.0 MPa | 9430 psi | ASTM D638 |
Tensile Modulus | 11.0 GPa | 1600 ksi | ASTM D638 |
Flexural Strength | 155 MPa | 22500 psi | ASTM D790 |
Flexural Modulus | 9.00 GPa | 1310 ksi | ASTM D790 |
Poissons Ratio | 0.30 | 0.30 | |
Shear Modulus | 4.20 GPa | 609 ksi | Calculated |
Izod Impact, Notched | 7.50 J/cm | 14.1 ft-lb/in | ASTM D256 |
Izod Impact, Unnotched | 10.0 J/cm | 18.7 ft-lb/in | ASTM D4812 |
Electrical Properties | Metric | English | Comments |
Dielectric Strength | 15.0 kV/mm | 381 kV/in | ASTM D149 |
Arc Resistance | 180 sec | 180 sec | ASTM D495 |
Comparative Tracking Index | 600 V | 600 V | ASTM D2303 |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 35.0 µm/m-°C | 19.4 µin/in-°F | Z Direction |
CTE, linear, Transverse to Flow | 25.0 µm/m-°C | 13.9 µin/in-°F | XY Direction |
Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft²-°F | |
UL RTI, Electrical | 130 °C | 266 °F | UL 746C |
UL RTI, Mechanical with Impact | 130 °C | 266 °F | UL 746C |
UL RTI, Mechanical without Impact | 130 °C | 266 °F | UL 746C |
Flammability, UL94 | V-0 @Thickness 2.50 mm | V-0 @Thickness 0.0984 in | |
Processing Properties | Metric | English | Comments |
Processing Temperature | 150 °C | 302 °F | Compression Molding |
Clamp Pressure | 3.45 - 6.89 MPa | 500 - 1000 psi | Molding Pressure |