- 密度 [g/cm3]: 2.1
- 吸水率 [%]: 0.03
- 缺口冲击强度: 0.214
- 断裂伸长率 [%]: 114
- 弯曲强度 [MPa]: 65.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.10 g/cc | 0.0759 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D1895 |
| Water Absorption | 0.030 % | 0.030 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0010 cm/cm | 0.0010 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 65.0 MPa | 9430 psi | ASTM D638 |
| Tensile Modulus | 23.0 GPa | 3340 ksi | ASTM D638 |
| Flexural Yield Strength | 114 MPa | 16500 psi | |
| Compressive Yield Strength | 338 MPa | 49000 psi | ASTM D695 |
| Izod Impact, Notched | 0.214 J/cm | 0.401 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 5.0 @Frequency 1e+6 Hz | 5.0 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 11.8 kV/mm | 300 kV/in | Step by step; ASTM D149 |
| 13.8 kV/mm | 351 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.015 @Frequency 1e+6 Hz | 0.015 @Frequency 1e+6 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 15.0 µm/m-°C @Temperature 23.0 - 60.0 °C | 8.33 µin/in-°F @Temperature 73.4 - 140 °F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 399 °F | ASTM D648 |
| Glass Transition Temp, Tg | 280 °C | 536 °F | |