- 密度 [g/cm3]: 1.43
- 吸水率 [%]: 0.5
- 缺口冲击强度: 0.28
- 弯曲强度 [MPa]: 55.0
- 弯曲模量 [MPa]: 8.20
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.43 g/cc | 0.0517 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.490 g/cc | 0.0177 lb/in³ | ASTM D1895 |
| Water Absorption | 0.50 % | 0.50 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0060 cm/cm | 0.0060 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
| Tensile Modulus | 6.90 GPa | 1000 ksi | ASTM D638 |
| Flexural Strength | 83.0 MPa | 12000 psi | |
| Flexural Modulus | 8.20 GPa | 1190 ksi | |
| Compressive Strength | 207 MPa | 30000 psi | ASTM D695 |
| Poissons Ratio | 0.24 | 0.24 | |
| Shear Modulus | 2.78 GPa | 403 ksi | Calculated |
| Izod Impact, Notched | 0.280 J/cm | 0.525 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 6.0 @Frequency 1e+6 Hz | 6.0 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 9.80 kV/mm | 249 kV/in | Step by step; ASTM D149 |
| 10.8 kV/mm | 274 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.050 @Frequency 1e+6 Hz | 0.050 @Frequency 1e+6 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 36.0 µm/m-°C @Temperature 30.0 - 150 °C | 20.0 µin/in-°F @Temperature 86.0 - 302 °F | |
| Specific Heat Capacity | 1.17 J/g-°C | 0.280 BTU/lb-°F | |
| Thermal Conductivity | 0.370 W/m-K | 2.57 BTU-in/hr-ft²-°F | Cenco Fitch |
| Deflection Temperature at 1.8 MPa (264 psi) | 177 °C | 351 °F | ASTM D648 |