- 密度 [g/cm3]: 1.8
- 吸水率 [%]: 0.2
- 缺口冲击强度: 0.27
- 弯曲强度 [MPa]: 50.0
- 弯曲模量 [MPa]: 14.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | Powder; ASTM D1895 | ||
| Density | 1.80 g/cc | 0.0650 lb/in³ | ASTM D-792 | ||
| Water Absorption | 0.20 % | 0.20 % | 24 hour; ASTM D570 | ||
| 0.35 % | 0.35 % | 48 hour; ASTM D570 | |||
| Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell E | 80 | 80 | ASTM D785 | ||
| Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 | ||
| Flexural Strength | 140 MPa | 20300 psi | ASTM D790 | ||
| Flexural Modulus | 14.0 GPa | 2030 ksi | ASTM D790 | ||
| Compressive Strength | 240 MPa | 34800 psi | ASTM D695 | ||
| Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256A | ||
| Electrical Properties | Metric | English | Comments | ||
| Arc Resistance | 180 sec | 180 sec | ASTM D495 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 19.0 µm/m-°C @Temperature 20.0 °C | 10.6 µin/in-°F @Temperature 68.0 °F | ASTM E831 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 265 °C | 509 °F | As Molded; ASTM D648A | ||
| >= 282 °C | >= 540 °F | Post Baked; ASTM D648A | |||
| Descriptive Properties | |||||
| Available Molding Grades | Compression, Transfer, Injection | ||||
| Color | Black | ||||
| Form | Granular | ||||