Plenco 00714 Melamine-Phenolic, Granular, Injection Molded

Plenco 00714 Melamine-Phenolic, Granular, Injection Molded 物性表: Plenco 00714 Melamine-Phenolic, Granular, Injection Molded物性表及特性介绍,Plenco 00714 Melamine-Phenolic, Granular, Injection Molded注塑参数详情,如需Plenco 00714 Melamine-Phenolic, Granular, Injection Molded下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.65
  • 吸水率 [%]: 0.286
  • 缺口冲击强度: 0.159
  • 弯曲强度 [MPa]: 62.0
  • 弯曲模量 [MPa]: 9.90
 
Physical PropertiesMetricEnglishComments
Bulk Density 0.720 g/cc0.0260 lb/in³ASTM D1895
Density 1.65 g/cc0.0596 lb/in³ASTM D792
Water Absorption 0.286 %0.286 %ASTM D570
Linear Mold Shrinkage 0.0068 cm/cm0.0068 in/inASTM D955
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell E 7171ASTM D785
Tensile Strength, Ultimate 62.0 MPa8990 psiASTM D638
Elongation at Break 0.70 %0.70 %ASTM D638
Tensile Modulus 11.0 GPa1600 ksiASTM D638
Flexural Strength 96.0 MPa13900 psiASTM D790
Flexural Modulus 9.90 GPa1440 ksiASTM D790
Compressive Strength 151 MPa21900 psiASTM D695
Poissons Ratio 0.310.31ASTM D638
Shear Modulus 4.20 GPa609 ksiCalculated
Izod Impact, Notched 0.159 J/cm0.298 ft-lb/inASTM D256
Charpy Impact, Notched 0.165 J/cm²0.785 ft-lb/in²ASTM D256
Impact 8585J/m drop Ball Impact; PLENCO
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 3.70e+12 ohm-cm3.70e+12 ohm-cmASTM D247
Dielectric Constant 6.96.9ASTM D150
Dielectric Strength 6.30 kV/mm160 kV/inStep by Step; ASTM D149
 9.50 kV/mm241 kV/inShort Time; ASTM D149
Dissipation Factor 0.0690.069ASTM D150
Arc Resistance 186 sec186 secASTM D495
Comparative Tracking Index 575 V575 VASTM D3638
 
Thermal PropertiesMetricEnglishComments
CTE, linear 52.0 µm/m-°C
@Temperature 40.0 - 130 °C
28.9 µin/in-°F
@Temperature 104 - 266 °F
TMA; ASTM E831
Maximum Service Temperature, Air 142 °C288 °FHeat Resistance; ASTM D570D
Deflection Temperature at 1.8 MPa (264 psi) 180 °C356 °FASTM D648
Flammability, UL94 V-0
@Thickness 1.50 mm
V-0
@Thickness 0.0591 in
Shrinkage 0.90 %0.90 %240 hr, 105ºC; ASTM D1299

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-35109.html

免责声明: 本文 Plenco 00714 Melamine-Phenolic, Granular, Injection Molded 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4