- 密度 [g/cm3]: 1.67
- 吸水率 [%]: 0.275
- 缺口冲击强度: 0.162
- 弯曲强度 [MPa]: 57.0
- 弯曲模量 [MPa]: 9.80
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.700 g/cc | 0.0253 lb/in³ | ASTM D1895 |
| Density | 1.67 g/cc | 0.0603 lb/in³ | ASTM D792 |
| Water Absorption | 0.275 % | 0.275 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0055 cm/cm | 0.0055 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 76 | 76 | ASTM D785 |
| Tensile Strength, Ultimate | 57.0 MPa | 8270 psi | ASTM D638 |
| Elongation at Break | 0.57 % | 0.57 % | ASTM D638 |
| Tensile Modulus | 11.8 GPa | 1710 ksi | ASTM D638 |
| Flexural Strength | 97.0 MPa | 14100 psi | ASTM D790 |
| Flexural Modulus | 9.80 GPa | 1420 ksi | ASTM D790 |
| Compressive Strength | 164 MPa | 23800 psi | ASTM D695 |
| Izod Impact, Notched | 0.162 J/cm | 0.303 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.199 J/cm² | 0.947 ft-lb/in² | ASTM D256 |
| Impact | 81 | 81 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | ASTM D247 |
| Dielectric Constant | 7.0 | 7.0 | ASTM D150 |
| Dielectric Strength | 6.60 kV/mm | 168 kV/in | Step by Step; ASTM D149 |
| 9.30 kV/mm | 236 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.062 | 0.062 | ASTM D150 |
| Arc Resistance | 186 sec | 186 sec | ASTM D495 |
| Comparative Tracking Index | 475 V | 475 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Thermal Conductivity | 0.580 W/m-K @Temperature 100 °C | 4.03 BTU-in/hr-ft²-°F @Temperature 212 °F | ASTM E1461 |
| Maximum Service Temperature, Air | 152 °C | 306 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 202 °C | 396 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Oxygen Index | 36 % | 36 % | ASTM D2863 |
| Shrinkage | 0.69 % | 0.69 % | 240 hr, 105ºC; ASTM D1299 |