Plenco 2308 Phenolic, Granular, Transfer Molded

Plenco 2308 Phenolic, Granular, Transfer Molded 物性表: Plenco 2308 Phenolic, Granular, Transfer Molded物性表及特性介绍,Plenco 2308 Phenolic, Granular, Transfer Molded注塑参数详情,如需Plenco 2308 Phenolic, Granular, Transfer Molded下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.43
  • 吸水率 [%]: 0.32
  • 缺口冲击强度: 0.184
  • 弯曲强度 [MPa]: 54.0
  • 弯曲模量 [MPa]: 8.20
 
Physical PropertiesMetricEnglishComments
Bulk Density 0.630 g/cc0.0228 lb/in³ASTM D1895
Density 1.43 g/cc0.0517 lb/in³ASTM D792
Water Absorption 0.32 %0.32 %ASTM D570
Linear Mold Shrinkage 0.0060 cm/cm0.0060 in/inASTM D955
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell E 8686ASTM D785
Tensile Strength, Ultimate 54.0 MPa7830 psiASTM D638
Elongation at Break 0.74 %0.74 %ASTM D638
Tensile Modulus 8.20 GPa1190 ksiASTM D638
Flexural Strength 88.0 MPa12800 psiASTM D790
Flexural Modulus 8.20 GPa1190 ksiASTM D790
Compressive Strength 207 MPa30000 psiASTM D695
Poissons Ratio 0.350.35ASTM D638
Shear Modulus 3.04 GPa441 ksiCalculated
Izod Impact, Notched 0.184 J/cm0.345 ft-lb/inASTM D256
Charpy Impact, Notched 0.199 J/cm²0.947 ft-lb/in²ASTM D256
Impact 100100J/m drop Ball Impact; PLENCO
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.60e+11 ohm-cm1.60e+11 ohm-cmASTM D247
Dielectric Constant 5.45.4ASTM D150
Dielectric Strength 11.6 kV/mm295 kV/inShort Time; ASTM D149
Dissipation Factor 0.0550.055ASTM D150
Arc Resistance 144 sec144 secASTM D495
Comparative Tracking Index 175 V175 VASTM D3638
 
Thermal PropertiesMetricEnglishComments
CTE, linear 69.0 µm/m-°C
@Temperature 40.0 - 130 °C
38.3 µin/in-°F
@Temperature 104 - 266 °F
TMA; ASTM E831
Maximum Service Temperature, Air 203 °C397 °FHeat Resistance; ASTM D570D
Deflection Temperature at 1.8 MPa (264 psi) 174 °C345 °FASTM D648
Flammability, UL94 HB
@Thickness 1.50 mm
HB
@Thickness 0.0591 in
Oxygen Index 26.1 %26.1 %ASTM D2863
Shrinkage 0.267 %0.267 %72 hr, 120ºC; ASTM D1299

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-35152.html

免责声明: 本文 Plenco 2308 Phenolic, Granular, Transfer Molded 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4