- 密度 [g/cm3]: 1.54
- 吸水率 [%]: 0.32
- 缺口冲击强度: 0.193
- 弯曲强度 [MPa]: 57.0
- 弯曲模量 [MPa]: 8.70
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.610 g/cc | 0.0220 lb/in³ | ASTM D1895 |
| Density | 1.54 g/cc | 0.0556 lb/in³ | ASTM D792 |
| Water Absorption | 0.32 % | 0.32 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0084 cm/cm | 0.0084 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 83 | 83 | ASTM D785 |
| Tensile Strength, Ultimate | 57.0 MPa | 8270 psi | ASTM D638 |
| Elongation at Break | 0.77 % | 0.77 % | ASTM D638 |
| Tensile Modulus | 9.80 GPa | 1420 ksi | ASTM D638 |
| Flexural Strength | 82.0 MPa | 11900 psi | ASTM D790 |
| Flexural Modulus | 8.70 GPa | 1260 ksi | ASTM D790 |
| Compressive Strength | 182 MPa | 26400 psi | ASTM D695 |
| Izod Impact, Notched | 0.193 J/cm | 0.362 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.183 J/cm² | 0.871 ft-lb/in² | ASTM D256 |
| Impact | 114 | 114 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 3.10e+11 ohm-cm | 3.10e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.5 | 5.5 | ASTM D150 |
| Dielectric Strength | 6.20 kV/mm | 157 kV/in | Step by Step; ASTM D149 |
| 9.40 kV/mm | 239 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.068 | 0.068 | ASTM D150 |
| Arc Resistance | 180 sec | 180 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 201 °C | 394 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 168 °C | 334 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Shrinkage | 0.34 % | 0.34 % | 72 hr, 120ºC; ASTM D1299 |