- 密度 [g/cm3]: 1.42
- 吸水率 [%]: 0.53
- 缺口冲击强度: 0.165
- 弯曲强度 [MPa]: 50.0
- 弯曲模量 [MPa]: 7.70
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.640 g/cc | 0.0231 lb/in³ | ASTM D1895 |
| Density | 1.42 g/cc | 0.0513 lb/in³ | ASTM D792 |
| Water Absorption | 0.53 % | 0.53 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0053 cm/cm | 0.0053 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 78 | 78 | ASTM D785 |
| Tensile Strength, Ultimate | 50.0 MPa | 7250 psi | ASTM D638 |
| Elongation at Break | 0.66 % | 0.66 % | ASTM D638 |
| Tensile Modulus | 8.50 GPa | 1230 ksi | ASTM D638 |
| Flexural Strength | 85.0 MPa | 12300 psi | ASTM D790 |
| Flexural Modulus | 7.70 GPa | 1120 ksi | ASTM D790 |
| Compressive Strength | 184 MPa | 26700 psi | ASTM D695 |
| Izod Impact, Notched | 0.165 J/cm | 0.309 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.187 J/cm² | 0.890 ft-lb/in² | ASTM D256 |
| Impact | 111 | 111 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.40e+13 ohm-cm | 2.40e+13 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.1 | 5.1 | ASTM D150 |
| Dielectric Strength | 10.3 kV/mm | 262 kV/in | Step by Step; ASTM D149 |
| 13.6 kV/mm | 345 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.042 | 0.042 | ASTM D150 |
| Arc Resistance | 141 sec | 141 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 194 °C | 381 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 176 °C | 349 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| Oxygen Index | 26.3 % | 26.3 % | ASTM D2863 |
| Shrinkage | 0.36 % | 0.36 % | 72 hr, 120ºC; ASTM D1299 |