- 密度 [g/cm3]: 1.59
- 吸水率 [%]: 0.132
- 缺口冲击强度: 0.196
- 弯曲强度 [MPa]: 52.0
- 弯曲模量 [MPa]: 9.60
Physical Properties | Metric | English | Comments |
---|---|---|---|
Bulk Density | 0.610 g/cc | 0.0220 lb/in³ | ASTM D1895 |
Density | 1.59 g/cc | 0.0574 lb/in³ | ASTM D792 |
Water Absorption | 0.132 % | 0.132 % | ASTM D570 |
Linear Mold Shrinkage | 0.0043 cm/cm | 0.0043 in/in | ASTM D955 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell E | 83 | 83 | ASTM D785 |
Tensile Strength, Ultimate | 52.0 MPa | 7540 psi | ASTM D638 |
Elongation at Break | 0.63 % | 0.63 % | ASTM D638 |
Tensile Modulus | 10.1 GPa | 1460 ksi | ASTM D638 |
Flexural Strength | 94.0 MPa | 13600 psi | ASTM D790 |
Flexural Modulus | 9.60 GPa | 1390 ksi | ASTM D790 |
Compressive Strength | 183 MPa | 26500 psi | ASTM D695 |
Poissons Ratio | 0.33 | 0.33 | ASTM D638 |
Shear Modulus | 3.80 GPa | 551 ksi | Calculated |
Izod Impact, Notched | 0.196 J/cm | 0.367 ft-lb/in | ASTM D256 |
Charpy Impact, Notched | 0.220 J/cm² | 1.05 ft-lb/in² | ASTM D256 |
Impact | 115 | 115 | J/m drop Ball Impact; PLENCO |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | 2.10e+11 ohm-cm | 2.10e+11 ohm-cm | ASTM D247 |
Dielectric Constant | 6.2 | 6.2 | ASTM D150 |
Dielectric Strength | 9.70 kV/mm | 246 kV/in | Short Time; ASTM D149 |
Dissipation Factor | 0.086 | 0.086 | ASTM D150 |
Arc Resistance | 184 sec | 184 sec | ASTM D495 |
Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
Thermal Properties | Metric | English | Comments |
CTE, linear | 42.0 µm/m-°C @Temperature 40.0 - 130 °C | 23.3 µin/in-°F @Temperature 104 - 266 °F | TMA; ASTM E831 |
Maximum Service Temperature, Air | 203 °C | 397 °F | Heat Resistance; ASTM D570D |
Deflection Temperature at 1.8 MPa (264 psi) | 213 °C | 415 °F | ASTM D648 |
Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
Oxygen Index | 27 % | 27 % | ASTM D2863 |
Shrinkage | 0.206 % | 0.206 % | 72 hr, 120ºC; ASTM D1299 |