- 密度 [g/cm3]: 1.57
- 吸水率 [%]: 0.223
- 缺口冲击强度: 0.174
- 弯曲强度 [MPa]: 49.0
- 弯曲模量 [MPa]: 9.80
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.660 g/cc | 0.0238 lb/in³ | ASTM D1895 |
| Density | 1.57 g/cc | 0.0567 lb/in³ | ASTM D792 |
| Water Absorption | 0.223 % | 0.223 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00283 cm/cm | 0.00283 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 83 | 83 | ASTM D785 |
| Tensile Strength, Ultimate | 49.0 MPa | 7110 psi | ASTM D638 |
| Elongation at Break | 0.51 % | 0.51 % | ASTM D638 |
| Tensile Modulus | 11.3 GPa | 1640 ksi | ASTM D638 |
| Flexural Strength | 74.0 MPa | 10700 psi | ASTM D790 |
| Flexural Modulus | 9.80 GPa | 1420 ksi | ASTM D790 |
| Compressive Strength | 183 MPa | 26500 psi | ASTM D695 |
| Izod Impact, Notched | 0.174 J/cm | 0.326 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.207 J/cm² | 0.985 ft-lb/in² | ASTM D256 |
| Impact | 98 | 98 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 3.00e+12 ohm-cm | 3.00e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.1 | 5.1 | ASTM D150 |
| Dielectric Strength | 13.1 kV/mm | 333 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.044 | 0.044 | ASTM D150 |
| Arc Resistance | 171 sec | 171 sec | ASTM D495 |
| Comparative Tracking Index | 200 V | 200 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 200 °C | 392 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 191 °C | 376 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Shrinkage | 0.127 % | 0.127 % | 72 hr, 120ºC; ASTM D1299 |