- 密度 [g/cm3]: 1.6
- 吸水率 [%]: 0.155
- 缺口冲击强度: 0.47
- 弯曲强度 [MPa]: 74.0
- 弯曲模量 [MPa]: 8.90
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.660 g/cc | 0.0238 lb/in³ | ASTM D1895 |
| Density | 1.60 g/cc | 0.0578 lb/in³ | ASTM D792 |
| Water Absorption | 0.155 % | 0.155 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0011 cm/cm | 0.0011 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 44 | 44 | ASTM D785 |
| Tensile Strength, Ultimate | 74.0 MPa | 10700 psi | ASTM D638 |
| Elongation at Break | 0.73 % | 0.73 % | ASTM D638 |
| Tensile Modulus | 9.20 GPa | 1330 ksi | ASTM D638 |
| Flexural Strength | 115 MPa | 16700 psi | ASTM D790 |
| Flexural Modulus | 8.90 GPa | 1290 ksi | ASTM D790 |
| Compressive Strength | 157 MPa | 22800 psi | ASTM D695 |
| Izod Impact, Notched | 0.470 J/cm | 0.881 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.450 J/cm² | 2.14 ft-lb/in² | ASTM D256 |
| Impact | 276 | 276 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 6.20e+11 ohm-cm | 6.20e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.8 | 5.8 | ASTM D150 |
| Dielectric Strength | 13.2 kV/mm | 335 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.077 | 0.077 | ASTM D150 |
| Arc Resistance | 120 sec | 120 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 230 °C | 446 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 241 °C | 466 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 6.00 mm | V-0 @Thickness 0.236 in | |
| Oxygen Index | 37 % | 37 % | ASTM D2863 |
| Shrinkage | 0.070 % | 0.070 % | 72 hr, 120ºC; ASTM D1299 |