- 密度 [g/cm3]: 1.4
- 吸水率 [%]: 0.37
- 缺口冲击强度: 0.284
- 弯曲强度 [MPa]: 43.0
- 弯曲模量 [MPa]: 6.70
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.470 g/cc | 0.0170 lb/in³ | ASTM D1895 |
| Density | 1.40 g/cc | 0.0506 lb/in³ | ASTM D792 |
| Water Absorption | 0.37 % | 0.37 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0091 cm/cm | 0.0091 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 76 | 76 | ASTM D785 |
| Tensile Strength, Ultimate | 43.0 MPa | 6240 psi | ASTM D638 |
| Elongation at Break | 0.71 % | 0.71 % | ASTM D638 |
| Tensile Modulus | 6.90 GPa | 1000 ksi | ASTM D638 |
| Flexural Strength | 67.0 MPa | 9720 psi | ASTM D790 |
| Flexural Modulus | 6.70 GPa | 972 ksi | ASTM D790 |
| Compressive Strength | 179 MPa | 26000 psi | ASTM D695 |
| Izod Impact, Notched | 0.284 J/cm | 0.532 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.291 J/cm² | 1.38 ft-lb/in² | ASTM D256 |
| Impact | 310 | 310 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.70e+11 ohm-cm | 1.70e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.3 | 5.3 | ASTM D150 |
| Dielectric Strength | 8.30 kV/mm | 211 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.074 | 0.074 | ASTM D150 |
| Arc Resistance | 133 sec | 133 sec | ASTM D495 |
| Comparative Tracking Index | 150 V | 150 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 187 °C | 369 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 163 °C | 325 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| Shrinkage | 0.29 % | 0.29 % | 72 hr, 120ºC; ASTM D1299 |