- 密度 [g/cm3]: 1.38
- 吸水率 [%]: 0.63
- 弯曲强度 [MPa]: 38.0
- 弯曲模量 [MPa]: 7.30
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.590 g/cc | 0.0213 lb/in³ | ASTM D1895 |
| Density | 1.38 g/cc | 0.0499 lb/in³ | ASTM D792 |
| Water Absorption | 0.63 % | 0.63 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 63 | 63 | ASTM D785 |
| Tensile Strength, Ultimate | 38.0 MPa | 5510 psi | ASTM D638 |
| Flexural Strength | 68.0 MPa | 9860 psi | ASTM D790 |
| Flexural Modulus | 7.30 GPa | 1060 ksi | ASTM D790 |
| Compressive Strength | 140 MPa | 20300 psi | ASTM D695 |
| Charpy Impact, Notched | 0.400 J/cm² | 1.90 ft-lb/in² | ASTM D256 |
| Impact | 410 | 410 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.00e+11 ohm-cm | 2.00e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.6 | 4.6 | ASTM D150 |
| Dielectric Strength | 13.9 kV/mm | 353 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.043 | 0.043 | ASTM D150 |
| Arc Resistance | 113 sec | 113 sec | ASTM D495 |
| Comparative Tracking Index | 150 V | 150 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 67.0 µm/m-°C @Temperature 40.0 - 130 °C | 37.2 µin/in-°F @Temperature 104 - 266 °F | TMA; ASTM E831 |
| Maximum Service Temperature, Air | 170 °C | 338 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 168 °C | 334 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| Oxygen Index | 24.2 % | 24.2 % | ASTM D2863 |