- 密度 [g/cm3]: 1.37
- 吸水率 [%]: 0.43
- 缺口冲击强度: 0.223
- 弯曲强度 [MPa]: 43.0
- 弯曲模量 [MPa]: 6.70
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.530 g/cc | 0.0191 lb/in³ | ASTM D1895 |
| Density | 1.37 g/cc | 0.0495 lb/in³ | ASTM D792 |
| Water Absorption | 0.43 % | 0.43 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0087 cm/cm | 0.0087 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 85 | 85 | ASTM D785 |
| Tensile Strength, Ultimate | 43.0 MPa | 6240 psi | ASTM D638 |
| Elongation at Break | 0.62 % | 0.62 % | ASTM D638 |
| Tensile Modulus | 8.10 GPa | 1170 ksi | ASTM D638 |
| Flexural Strength | 66.0 MPa | 9570 psi | ASTM D790 |
| Flexural Modulus | 6.70 GPa | 972 ksi | ASTM D790 |
| Compressive Strength | 205 MPa | 29700 psi | ASTM D695 |
| Izod Impact, Notched | 0.223 J/cm | 0.418 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.226 J/cm² | 1.08 ft-lb/in² | ASTM D256 |
| Impact | 157 | 157 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.70e+11 ohm-cm | 1.70e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.4 | 5.4 | ASTM D150 |
| Dielectric Strength | 9.60 kV/mm | 244 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.059 | 0.059 | ASTM D150 |
| Arc Resistance | 76 sec | 76 sec | ASTM D495 |
| Comparative Tracking Index | 150 V | 150 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 193 °C | 379 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 163 °C | 325 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 6.00 mm | V-0 @Thickness 0.236 in | |
| Shrinkage | 0.43 % | 0.43 % | 72 hr, 120ºC; ASTM D1299 |