塑胶原料之家
  1. 首页
  2. 英文物性
  3. 聚氨酯TS
  4. Overview of materials for Thermoset Polyurethane Foam, Unreinforced

Overview of materials for Thermoset Polyurethane Foam, Unreinforced

Overview of materials for Thermoset Polyurethane Foam, Unreinforced 物性表: Overview of materials for Thermoset Polyurethane Foam, Unreinforced物性表及特性介绍,Overview of materials for Thermoset Polyurethane Foam, Unreinforced注塑参数详情,如需Overview of materials for Thermoset Polyurethane Foam, Unreinforced下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.025
  • 吸水率 [%]: 0.7
  • 拉伸强度 [MPa]: 0.241
  • 断裂伸长率 [%]: 6.60
  • 弯曲强度 [MPa]: 0.0827
  • 弯曲模量 [MPa]: 0.0165
  • 热变形温度 [℃]: 47.0
  • 脆化温度 [℃]: -51.0
  • 透光率 [%]: 90.0
 
Physical PropertiesMetricEnglishComments
Density 0.0250 - 1.39 g/cc0.000903 - 0.0504 lb/in³Average value: 0.460 g/cc Grade Count:121
Apparent Bulk Density 0.0220 - 0.880 g/cc0.000795 - 0.0318 lb/in³Average value: 0.262 g/cc Grade Count:24
Water Absorption 0.700 - 38.0 %0.700 - 38.0 %Average value: 9.81 % Grade Count:51
Moisture Absorption at Equilibrium 2.00 %2.00 %Average value: 2.00 % Grade Count:16
Water Absorption at Saturation 5.00 - 20.0 %5.00 - 20.0 %Average value: 12.3 % Grade Count:11
Thickness 27.9 - 12700 microns1.10 - 500 milAverage value: 2230 microns Grade Count:26
Linear Mold Shrinkage 0.000800 - 0.0100 cm/cm0.000800 - 0.0100 in/inAverage value: 0.00627 cm/cm Grade Count:9
Outgassing - Total Mass Loss  0.0400 - 1.73 %
@Temperature 125 - 125 °C		0.0400 - 1.73 %
@Temperature 257 - 257 °F		Average value: 0.609 % Grade Count:14
 0.0400 - 1.73 %
@Time 86400 - 86400 sec		0.0400 - 1.73 %
@Time 24.0 - 24.0 hour		Average value: 0.609 % Grade Count:14
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore A 3.00 - 55.03.00 - 55.0Average value: 25.3 Grade Count:33
Hardness, Shore D 28.0 - 81.028.0 - 81.0Average value: 58.3 Grade Count:10
Hardness, Shore O 2.00 - 65.02.00 - 65.0Average value: 27.6 Grade Count:34
Tensile Strength, Ultimate 0.0827 - 207 MPa12.0 - 30000 psiAverage value: 34.8 MPa Grade Count:88
Tensile Strength, Yield 0.241 - 103 MPa35.0 - 15000 psiAverage value: 52.7 MPa Grade Count:30
Film Elongation at Break, MD 78.0 %78.0 %Average value: 78.0 % Grade Count:6
 74.0 - 74.0 %
@Temperature 66.0 - 66.0 °C		74.0 - 74.0 %
@Temperature 151 - 151 °F		Average value: 74.0 % Grade Count:6
 74.0 - 74.0 %
@Time 346000 - 346000 sec		74.0 - 74.0 %
@Time 96.0 - 96.0 hour		Average value: 74.0 % Grade Count:6
Film Elongation at Break, TD 32.0 %32.0 %Average value: 32.0 % Grade Count:6
 66.0 - 66.0 %
@Temperature 66.0 - 66.0 °C		66.0 - 66.0 %
@Temperature 151 - 151 °F		Average value: 66.0 % Grade Count:6
 66.0 - 66.0 %
@Time 346000 - 346000 sec		66.0 - 66.0 %
@Time 96.0 - 96.0 hour		Average value: 66.0 % Grade Count:6
Elongation at Break 3.20 - 760 %3.20 - 760 %Average value: 172 % Grade Count:98
Modulus of Elasticity 0.000138 - 3.45 GPa0.0200 - 500 ksiAverage value: 1.01 GPa Grade Count:45
Flexural Yield Strength 6.60 - 62.0 MPa957 - 8990 psiAverage value: 26.8 MPa Grade Count:11
Flexural Modulus 0.0165 - 1.68 GPa2.40 - 244 ksiAverage value: 0.801 GPa Grade Count:11
Compressive Yield Strength 0.00172 - 48.0 MPa0.250 - 6960 psiAverage value: 2.47 MPa Grade Count:107
Compressive Modulus 0.0000276 - 1.15 GPa0.00400 - 167 ksiAverage value: 0.129 GPa Grade Count:25
Resilience 29.0 - 52.029.0 - 52.0Average value: 38.8 Grade Count:13
Poissons Ratio 0.300 - 0.7500.300 - 0.750Average value: 0.353 Grade Count:8
Shear Modulus 0.00710 - 0.870 GPa1.03 - 126 ksiAverage value: 0.184 GPa Grade Count:7
Shear Strength 0.590 - 16.0 MPa85.6 - 2320 psiAverage value: 6.27 MPa Grade Count:7
Charpy Impact, Notched 0.380 - 3.20 J/cm²1.81 - 15.2 ft-lb/in²Average value: 1.43 J/cm² Grade Count:9
Coefficient of Friction 0.400 - 1.400.400 - 1.40Average value: 0.463 Grade Count:16
Tear Strength Test 30.0 - 13730.0 - 137Average value: 84.6 Grade Count:13
Tear Strength 0.0400 - 10.5 kN/m0.228 - 60.0 pliAverage value: 1.08 kN/m Grade Count:53
Peel Strength 0.438 - 0.892 kN/m2.50 - 5.09 pliAverage value: 0.648 kN/m Grade Count:6
Compression Set 1.30 - 54.0 %1.30 - 54.0 %Average value: 8.23 % Grade Count:68
 0.000 - 35.0 %
@Temperature 70.0 - 125 °C		0.000 - 35.0 %
@Temperature 158 - 257 °F		Average value: 8.36 % Grade Count:57
 <= 10.0 %
@Temperature 70.0 - 70.0 °C		<= 10.0 %
@Temperature 158 - 158 °F		Average value: 8.36 % Grade Count:1
 <= 10.0 %
@Time 79200 - 79200 sec		<= 10.0 %
@Time 22.0 - 22.0 hour		Average value: 8.36 % Grade Count:1
Seal Strength 9.40 g/25 mm9.40 g/inAverage value: 9.40 g/25 mm Grade Count:6
 10.6 - 10.6 g/25 mm
@Temperature 66.0 - 66.0 °C		10.6 - 10.6 g/in
@Temperature 151 - 151 °F		Average value: 10.6 g/25 mm Grade Count:6
 10.6 - 10.6 g/25 mm
@Time 346000 - 346000 sec		10.6 - 10.6 g/in
@Time 96.0 - 96.0 hour		Average value: 10.6 g/25 mm Grade Count:6
Film Tensile Strength at Break, MD 207 MPa30000 psiAverage value: 207 MPa Grade Count:3
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 3.00e+10 - 3.20e+14 ohm-cm3.00e+10 - 3.20e+14 ohm-cmAverage value: 4.19e+13 ohm-cm Grade Count:38
Surface Resistance 0.100 - 1.00e+15 ohm0.100 - 1.00e+15 ohmAverage value: 1.08e+14 ohm Grade Count:23
 0.00700 - 0.0170 ohm
@Temperature 35.0 - 121 °C		0.00700 - 0.0170 ohm
@Temperature 95.0 - 250 °F		Average value: 0.0105 ohm Grade Count:5
 0.00700 - 0.0170 ohm
@Time 605000 - 7.88e+6 sec		0.00700 - 0.0170 ohm
@Time 168 - 2190 hour		Average value: 0.0105 ohm Grade Count:5
Shielding Effectiveness 62.0 - 110 dB62.0 - 110 dBAverage value: 87.5 dB Grade Count:8
Dielectric Constant 1.48 - 2.691.48 - 2.69Average value: 1.73 Grade Count:30
Dielectric Strength 1.65 - 13.8 kV/mm42.0 - 350 kV/inAverage value: 2.83 kV/mm Grade Count:39
Dissipation Factor 0.0400 - 0.05000.0400 - 0.0500Average value: 0.0485 Grade Count:27
 
Thermal PropertiesMetricEnglishComments
CTE, linear 63.0 - 310 µm/m-°C35.0 - 172 µin/in-°FAverage value: 214 µm/m-°C Grade Count:39
Thermal Conductivity 0.0760 - 0.830 W/m-K0.527 - 5.76 BTU-in/hr-ft²-°FAverage value: 0.129 W/m-K Grade Count:17
Maximum Service Temperature, Air 70.0 - 125 °C158 - 257 °FAverage value: 97.3 °C Grade Count:53
Deflection Temperature at 0.46 MPa (66 psi) 47.0 - 100 °C117 - 212 °FAverage value: 77.4 °C Grade Count:7
Minimum Service Temperature, Air -40.0 - -30.0 °C-40.0 - -22.0 °FAverage value: -36.0 °C Grade Count:9
Brittleness Temperature -51.0 - -12.0 °C-59.8 - 10.4 °FAverage value: -36.5 °C Grade Count:24
Flammability, UL94 HB - 5VAHB - 5VAGrade Count:10
Shrinkage  0.000 - 1.20 %
@Temperature 150 - 150 °C		0.000 - 1.20 %
@Temperature 302 - 302 °F		Average value: 0.600 % Grade Count:15
 0.000 - 1.20 %
@Time 2340 - 2340 sec		0.000 - 1.20 %
@Time 0.650 - 0.650 hour		Average value: 0.600 % Grade Count:15
 
Optical PropertiesMetricEnglishComments
Transmission, Visible 90.0 %90.0 %Average value: 90.0 % Grade Count:5

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-36614.html

免责声明: 本文 Overview of materials for Thermoset Polyurethane Foam, Unreinforced 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4