- 密度 [g/cm3]: 1.32
- 吸水率 [%]: 0.07
- 缺口冲击强度: 0.427
- 断裂伸长率 [%]: 70.0
- 弯曲强度 [MPa]: 50.0
- 弯曲模量 [MPa]: 3.10
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.32 - 1.46 g/cc | 0.0477 - 0.0527 lb/in³ | Average value: 1.38 g/cc Grade Count:7 |
| Filler Content | 10.0 - 20.0 % | 10.0 - 20.0 % | Average value: 15.0 % Grade Count:4 |
| Water Absorption | 0.0700 - 0.200 % | 0.0700 - 0.200 % | Average value: 0.117 % Grade Count:3 |
| Linear Mold Shrinkage | 0.00700 - 0.0150 cm/cm | 0.00700 - 0.0150 in/in | Average value: 0.0119 cm/cm Grade Count:7 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 50.0 - 103 MPa | 7250 - 15000 psi | Average value: 69.7 MPa Grade Count:7 |
| Elongation at Break | 3.00 - 8.00 % | 3.00 - 8.00 % | Average value: 4.75 % Grade Count:6 |
| Modulus of Elasticity | 3.45 - 5.86 GPa | 500 - 850 ksi | Average value: 4.51 GPa Grade Count:7 |
| Flexural Yield Strength | 70.0 - 131 MPa | 10200 - 19000 psi | Average value: 105 MPa Grade Count:7 |
| Flexural Modulus | 3.10 - 4.55 GPa | 450 - 660 ksi | Average value: 3.80 GPa Grade Count:7 |
| Izod Impact, Notched | 0.427 - 0.534 J/cm | 0.800 - 1.00 ft-lb/in | Average value: 0.498 J/cm Grade Count:6 |
| Izod Impact, Unnotched | 4.27 - 4.81 J/cm | 8.00 - 9.00 ft-lb/in | Average value: 4.49 J/cm Grade Count:6 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+14 - 1.00e+16 ohm-cm | 1.00e+14 - 1.00e+16 ohm-cm | Average value: 2.58e+15 ohm-cm Grade Count:4 |
| Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | Average value: 1.00e+14 ohm Grade Count:3 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 76.7 - 202 °C | 170 - 395 °F | Average value: 139 °C Grade Count:3 |
| Flammability, UL94 | HB | HB | Grade Count:6 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 238 - 280 °C | 460 - 536 °F | Average value: 257 °C Grade Count:6 |
| Mold Temperature | 60.0 - 120 °C | 140 - 248 °F | Average value: 92.9 °C Grade Count:7 |
| Drying Temperature | 80.0 - 121 °C | 176 - 250 °F | Average value: 115 °C Grade Count:6 |
| Dry Time | 4.00 hour | 4.00 hour | Average value: 4.00 hour Grade Count:4 |
| Moisture Content | 0.0300 % | 0.0300 % | Average value: 0.0300 % Grade Count:5 |
| Dew Point | -28.9 °C | -20.0 °F | Average value: -28.9 °C Grade Count:5 |
| Injection Pressure | 68.9 - 103 MPa | 10000 - 15000 psi | Average value: 86.2 MPa Grade Count:6 |