- 熔体流动速率 [g/10min]: 3.0
- 密度 [g/cm3]: 1.13
- 吸水率 [%]: 0.05
- 缺口冲击强度: 0.374
- 拉伸强度 [MPa]: 27.0
- 断裂伸长率 [%]: 45.0
- 弯曲强度 [MPa]: 27.6
- 弯曲模量 [MPa]: 1.50
- 硬度: 104.0
- 热变形温度 [℃]: 90.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 - 1.73 g/cc | 0.0408 - 0.0625 lb/in³ | Average value: 1.30 g/cc Grade Count:49 |
| Water Absorption | 0.0500 - 0.400 % | 0.0500 - 0.400 % | Average value: 0.179 % Grade Count:12 |
| Moisture Absorption at Equilibrium | 0.0500 - 0.200 % | 0.0500 - 0.200 % | Average value: 0.154 % Grade Count:16 |
| Water Absorption at Saturation | 0.450 - 0.800 % | 0.450 - 0.800 % | Average value: 0.617 % Grade Count:3 |
| Linear Mold Shrinkage | 0.00160 - 0.0270 cm/cm | 0.00160 - 0.0270 in/in | Average value: 0.0145 cm/cm Grade Count:35 |
| Linear Mold Shrinkage, Transverse | 0.00160 - 0.0300 cm/cm | 0.00160 - 0.0300 in/in | Average value: 0.0144 cm/cm Grade Count:13 |
| Melt Flow | 3.00 - 73.8 g/10 min | 3.00 - 73.8 g/10 min | Average value: 23.8 g/10 min Grade Count:16 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 104 - 120 | 104 - 120 | Average value: 114 Grade Count:11 |
| Hardness, Shore D | 65.0 - 70.0 | 65.0 - 70.0 | Average value: 66.7 Grade Count:3 |
| Tensile Strength, Ultimate | 27.6 - 145 MPa | 4000 - 21000 psi | Average value: 57.5 MPa Grade Count:29 |
| Tensile Strength, Yield | 27.0 - 135 MPa | 3920 - 19600 psi | Average value: 49.4 MPa Grade Count:27 |
| Elongation at Break | 2.00 - 120 % | 2.00 - 120 % | Average value: 39.7 % Grade Count:37 |
| Elongation at Yield | 3.00 - 130 % | 3.00 - 130 % | Average value: 13.9 % Grade Count:13 |
| Modulus of Elasticity | 1.60 - 17.0 GPa | 232 - 2470 ksi | Average value: 3.22 GPa Grade Count:27 |
| Flexural Yield Strength | 45.0 - 172 MPa | 6530 - 25000 psi | Average value: 78.4 MPa Grade Count:28 |
| Flexural Modulus | 1.50 - 7.58 GPa | 218 - 1100 ksi | Average value: 2.39 GPa Grade Count:31 |
| Izod Impact, Notched | 0.374 J/cm - NB | 0.700 ft-lb/in - NB | Average value: 3.48 J/cm Grade Count:26 |
| 2.24 - 6.00 J/cm @Temperature -40.0 - -20.0 °C | 4.20 - 11.2 ft-lb/in @Temperature -40.0 - -4.00 °F | Average value: 4.12 J/cm Grade Count:2 | |
| Izod Impact, Unnotched | 18.7 J/cm - NB | 35.0 ft-lb/in - NB | Average value: 18.7 J/cm Grade Count:6 |
| Izod Impact, Notched (ISO) | 8.00 - 60.0 kJ/m² | 3.81 - 28.6 ft-lb/in² | Average value: 19.1 kJ/m² Grade Count:11 |
| 6.00 - 40.0 kJ/m² @Temperature -30.0 - -10.0 °C | 2.86 - 19.0 ft-lb/in² @Temperature -22.0 - 14.0 °F | Average value: 13.8 kJ/m² Grade Count:10 | |
| Izod Impact, Unnotched (ISO) | 65.0 kJ/m² - NB | 30.9 ft-lb/in² - NB | Average value: 65.0 kJ/m² Grade Count:6 |
| 60.0 kJ/m² - NB @Temperature -30.0 - -30.0 °C | 28.6 ft-lb/in² - NB @Temperature -22.0 - -22.0 °F | Average value: 60.0 kJ/m² Grade Count:6 | |
| Charpy Impact Unnotched | 30.0 J/cm² - NB | 143 ft-lb/in² - NB | Average value: 30.0 J/cm² Grade Count:12 |
| 22.0 J/cm² - NB @Temperature -40.0 - -20.0 °C | 105 ft-lb/in² - NB @Temperature -40.0 - -4.00 °F | Average value: 27.3 J/cm² Grade Count:12 | |
| Charpy Impact, Notched | 1.00 - 9.00 J/cm² | 4.76 - 42.8 ft-lb/in² | Average value: 4.69 J/cm² Grade Count:13 |
| 0.900 - 2.50 J/cm² @Temperature -30.0 - -20.0 °C | 4.28 - 11.9 ft-lb/in² @Temperature -22.0 - -4.00 °F | Average value: 1.75 J/cm² Grade Count:11 | |
| Gardner Impact | 36.2 J | 26.7 ft-lb | Average value: 36.2 J Grade Count:3 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+11 - 1.00e+17 ohm-cm | 1.00e+11 - 1.00e+17 ohm-cm | Average value: 1.17e+16 ohm-cm Grade Count:22 |
| Surface Resistance | 1.00e+6 - 1.00e+15 ohm | 1.00e+6 - 1.00e+15 ohm | Average value: 4.20e+14 ohm Grade Count:16 |
| Dielectric Constant | 2.70 - 3.70 | 2.70 - 3.70 | Average value: 3.18 Grade Count:9 |
| Dielectric Strength | 15.7 - 30.0 kV/mm | 400 - 762 kV/in | Average value: 25.0 kV/mm Grade Count:14 |
| Dissipation Factor | 0.00200 - 0.0190 | 0.00200 - 0.0190 | Average value: 0.00940 Grade Count:6 |
| Arc Resistance | 110 - 130 sec | 110 - 130 sec | Average value: 119 sec Grade Count:4 |
| Comparative Tracking Index | 225 - 600 V | 225 - 600 V | Average value: 475 V Grade Count:8 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 25.2 - 150 µm/m-°C | 14.0 - 83.3 µin/in-°F | Average value: 98.8 µm/m-°C Grade Count:16 |
| CTE, linear, Transverse to Flow | 105 - 150 µm/m-°C | 58.3 - 83.3 µin/in-°F | Average value: 127 µm/m-°C Grade Count:9 |
| Melting Point | 210 - 255 °C | 410 - 491 °F | Average value: 225 °C Grade Count:22 |
| Deflection Temperature at 0.46 MPa (66 psi) | 90.0 - 225 °C | 194 - 437 °F | Average value: 142 °C Grade Count:37 |
| Deflection Temperature at 1.8 MPa (264 psi) | 48.9 - 210 °C | 120 - 410 °F | Average value: 79.1 °C Grade Count:43 |
| Vicat Softening Point | 105 - 215 °C | 221 - 419 °F | Average value: 157 °C Grade Count:11 |
| Flammability, UL94 | HB - V-0 | HB - V-0 | Grade Count:38 |
| Oxygen Index | 22.0 - 25.0 % | 22.0 - 25.0 % | Average value: 22.8 % Grade Count:4 |
| Glow Wire Test | 675 - 960 °C | 1250 - 1760 °F | Average value: 820 °C Grade Count:6 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 224 - 280 °C | 435 - 536 °F | Average value: 252 °C Grade Count:11 |
| Feed Temperature | 50.0 - 250 °C | 122 - 482 °F | Average value: 81.1 °C Grade Count:9 |
| Nozzle Temperature | 225 - 280 °C | 437 - 536 °F | Average value: 251 °C Grade Count:5 |
| Melt Temperature | 190 - 280 °C | 374 - 536 °F | Average value: 248 °C Grade Count:20 |
| Mold Temperature | 30.0 - 110 °C | 86.0 - 230 °F | Average value: 73.6 °C Grade Count:26 |
| Drying Temperature | 100 - 140 °C | 212 - 284 °F | Average value: 119 °C Grade Count:18 |
| Dry Time | 2.00 - 6.00 hour | 2.00 - 6.00 hour | Average value: 3.50 hour Grade Count:19 |
| Moisture Content | 0.0300 - 0.200 % | 0.0300 - 0.200 % | Average value: 0.0820 % Grade Count:10 |
| Injection Pressure | 44.1 - 103 MPa | 6400 - 15000 psi | Average value: 71.6 MPa Grade Count:7 |
| Hold Pressure | 40.0 - 80.0 MPa | 5800 - 11600 psi | Average value: 60.0 MPa Grade Count:7 |
| Back Pressure | 0.000 - 4.90 MPa | 0.000 - 711 psi | Average value: 2.45 MPa Grade Count:3 |
| Screw Speed | 70.0 - 100 rpm | 70.0 - 100 rpm | Average value: 85.0 rpm Grade Count:3 |