- 密度 [g/cm3]: 1.38
- 吸水率 [%]: 0.08
- 缺口冲击强度: 0.8
- 断裂伸长率 [%]: 82.7
- 弯曲模量 [MPa]: 2.28
- 热变形温度 [℃]: 154.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.38 g/cc | 0.0499 lb/in³ | ASTM D792 |
| Water Absorption | 0.080 % | 0.080 % | 24 hrs.; ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 72 | 72 | ASTM D785 |
| Tensile Strength at Break | 59.9 MPa | 8690 psi | ASTM D638 |
| Elongation at Break | 300 % | 300 % | ASTM D638 |
| Modulus of Elasticity | 2.86 GPa | 415 ksi | ASTM D638 |
| Flexural Yield Strength | 82.7 MPa | 12000 psi | ASTM D790 |
| Flexural Modulus | 2.28 GPa | 331 ksi | ASTM D790 |
| Shear Modulus | 1.04 GPa | 151 ksi | |
| Izod Impact, Notched | 0.800 J/cm | 1.50 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.2 @Frequency 100 Hz | 3.2 @Frequency 100 Hz | ASTM D150 |
| Dielectric Strength | 15.7 kV/mm @Thickness 3.17 mm | 399 kV/in @Thickness 0.125 in | short term; ASTM D149 |
| Dissipation Factor | 0.0010 @Frequency 100 Hz | 0.0010 @Frequency 100 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 83.5 µm/m-°C @Temperature 20.0 °C | 46.4 µin/in-°F @Temperature 68.0 °F | ASTM D696 |
| Specific Heat Capacity | 1.30 J/g-°C | 0.311 BTU/lb-°F | |
| Thermal Conductivity | 0.210 W/m-K | 1.46 BTU-in/hr-ft²-°F | ASTM C177 |
| Melting Point | 254 °C | 489 °F | |
| Deflection Temperature at 0.46 MPa (66 psi) | 154 °C | 309 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 54.0 °C | 129 °F | ASTM D648 |
| Flammability, UL94 | HB | HB | |