- 吸水率 [%]: 0.07
- 缺口冲击强度: 0.374
- 拉伸强度 [MPa]: 49.6
- 弯曲模量 [MPa]: 2.69
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.36 g/cc | 1.36 g/cc | ASTM D792 | ||
| Water Absorption | 0.070 % @Time 86400 sec | 0.070 % @Time 24.0 hour | ASTM D570 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 49.6 MPa | 7200 psi | ASTM D638 | ||
| Elongation at Break | 40 % | 40 % | ASTM D638 | ||
| Tensile Modulus | 2.62 GPa | 380 ksi | ASTM D638 | ||
| Flexural Modulus | 2.69 GPa @Temperature 22.8 °C | 390 ksi @Temperature 73.0 °F | ASTM D790 | ||
| Izod Impact, Notched | 0.374 J/cm | 0.700 ft-lb/in | ASTM D256 | ||
| Coefficient of Friction, Dynamic | 0.11 | 0.11 | vs Steel; LNP EPALP-TB001 | ||
| Coefficient of Friction, Static | 0.080 | 0.080 | Steel; LNP EPALP-TB001 | ||
| K Factor (Wear Factor) | 38 | 38 | in5-min/ft-lbs/hr, at 2000 PV; LNP EPALP-TB001 | ||
| Limiting Pressure Velocity | 0.550 MPa-m/sec | 15700 psi-ft/min | LNP EPALP-TB003, at 100 ft/min | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 105 °C | 221 °F | UL746B | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 90.6 °C | 195 °F | ASTM D648 | ||
| Descriptive Properties | |||||
| 3A Compliant | YES | ||||
| FDA Complaint | YES | ||||
| USDA Compliant | YES | ||||