- 密度 [g/cm3]: 1.3
- 吸水率 [%]: 0.08
- 缺口冲击强度: 0.392
- 断裂伸长率 [%]: 88.3
- 弯曲强度 [MPa]: 58.8
- 弯曲模量 [MPa]: 2.06
- 硬度: 118.0
- 热变形温度 [℃]: 155.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.30 g/cc | 0.0470 lb/in³ | DIN 53479; ASTM D792 |
Water Absorption | 0.080 % | 0.080 % | DIN 53475; ASTM D570 |
Linear Mold Shrinkage | 0.017 - 0.023 cm/cm | 0.017 - 0.023 in/in | ASTM D955 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell R | 118 | 118 | DIN 53505; ASTM D785 |
Tensile Strength, Ultimate | 58.8 MPa | 8530 psi | DIN 53455; ASTM D638 |
Elongation at Break | 100 % | 100 % | DIN 53455; ASTM D638 |
Flexural Yield Strength | 88.3 MPa | 12800 psi | DIN 53455; ASTM D790 |
Flexural Modulus | 2.06 GPa | 299 ksi | DIN 53452; ASTM D790 |
Izod Impact, Notched | 0.392 J/cm | 0.735 ft-lb/in | DIN 53453; ASTM D256 |
Electrical Properties | Metric | English | Comments |
Dielectric Constant | 3.1 @Frequency 1e+6 Hz | 3.1 @Frequency 1e+6 Hz | ASTM D150/DIN 53483 |
Dielectric Strength | 28.0 kV/mm | 711 kV/in | ASTM D149/DIN 53481 |
Arc Resistance | 120 sec | 120 sec | ASTM D495 |
Thermal Properties | Metric | English | Comments |
CTE, linear | 80.0 µm/m-°C @Temperature 20.0 °C | 44.4 µin/in-°F @Temperature 68.0 °F | DIN 53752; ASTM D696 |
Melting Point | 224 °C | 435 °F | DIN 53736; ASTM D789 |
Deflection Temperature at 0.46 MPa (66 psi) | 155 °C | 311 °F | DIN 53461; ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C | 140 °F | DIN 53461; ASTM D648 |
Flammability, UL94 | HB | HB |