- 密度 [g/cm3]: 1.83
- 吸水率 [%]: 0.05
- 缺口冲击强度: 0.75
- 断裂伸长率 [%]: 179.1
- 弯曲强度 [MPa]: 144.3
- 弯曲模量 [MPa]: 10.82
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.83 g/cc | 0.0661 lb/in³ | ASTM D792 |
| Water Absorption | 0.050 % | 0.050 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0010 cm/cm | 0.0010 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 144.3 MPa | 20930 psi | ASTM D638 |
| Elongation at Break | 1.69 % | 1.69 % | ASTM D638 |
| Tensile Modulus | 13.13 GPa | 1904 ksi | ASTM D638 |
| Flexural Yield Strength | 179.1 MPa | 25980 psi | ASTM D790 |
| Flexural Modulus | 10.82 GPa | 1569 ksi | ASTM D790 |
| Compressive Yield Strength | 193 MPa | 28000 psi | ASTM D695 |
| Izod Impact, Notched | 0.750 J/cm | 1.41 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 3.40e+16 ohm-cm | 3.40e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.6 @Frequency 1e+6 Hz | 3.6 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 14.8 kV/mm | 376 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.011 @Frequency 1e+6 Hz | 0.011 @Frequency 1e+6 Hz | ASTM D150 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 247 °C | 477 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.47 mm | V-0 @Thickness 0.0579 in | |