- 熔体流动速率 [g/10min]: 4.1
- 密度 [g/cm3]: 1.2
- 缺口冲击强度: 2.67
- 拉伸强度 [MPa]: 55.0
- 断裂伸长率 [%]: 70.0
- 弯曲模量 [MPa]: 2.15
- 热变形温度 [℃]: 120.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.24 g/cc | 1.24 g/cc | ASTM D 792 |
| Density | 1.20 g/cc | 0.0434 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage, Flow | 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm | 0.0070 - 0.0090 in/in @Thickness 0.126 in | SABIC Method |
| Linear Mold Shrinkage, Transverse | 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm | 0.0070 - 0.0090 in/in @Thickness 0.126 in | SABIC Method |
| Melt Flow | 4.1 g/10 min @Load 5.00 kg, Temperature 250 °C | 4.1 g/10 min @Load 11.0 lb, Temperature 482 °F | ASTM D 1238 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 56.0 MPa | 8120 psi | 50 mm/min; ISO 527 |
| 61.0 MPa | 8850 psi | Type I, 50 mm/min; ASTM D 638 | |
| Tensile Strength, Yield | 55.0 MPa | 7980 psi | 50 mm/min; ISO 527 |
| 61.0 MPa | 8850 psi | Type I, 50 mm/min; ASTM D 638 | |
| Elongation at Break | 120 % | 120 % | Type I, 50 mm/min; ASTM D 638 |
| 120 % | 120 % | 50 mm/min; ISO 527 | |
| Elongation at Yield | 4.5 % | 4.5 % | 50 mm/min; ISO 527 |
| 5.2 % | 5.2 % | Type I, 50 mm/min; ASTM D 638 | |
| Tensile Modulus | 2.48 GPa | 360 ksi | 50 mm/min; ASTM D 638 |
| Flexural Yield Strength | 70.0 MPa | 10200 psi | 2 mm/min; ISO 178 |
| 99.0 MPa | 14400 psi | 1.3 mm/min, 50 mm span; ASTM D 790 | |
| Flexural Modulus | 2.15 GPa | 312 ksi | 2 mm/min; ISO 178 |
| 2.48 GPa | 360 ksi | 1.3 mm/min, 50 mm span; ASTM D 790 | |
| Izod Impact, Notched | 2.67 J/cm @Temperature -30.0 °C | 5.00 ft-lb/in @Temperature -22.0 °F | ASTM D 256 |
| 8.00 J/cm @Temperature 23.0 °C | 15.0 ft-lb/in @Temperature 73.4 °F | ASTM D 256 | |
| Izod Impact, Notched (ISO) | 20.0 kJ/m² @Temperature -30.0 °C | 9.52 ft-lb/in² @Temperature -22.0 °F | 80*10*4; ISO 180/1A |
| 50.0 kJ/m² @Temperature 23.0 °C | 23.8 ft-lb/in² @Temperature 73.4 °F | 80*10*4; ISO 180/1A | |
| Charpy Impact, Notched | 6.00 J/cm² @Temperature 23.0 °C | 28.6 ft-lb/in² @Temperature 73.4 °F | V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA |
| Impact Test | 54.0 J @Temperature 23.0 °C | 39.8 ft-lb @Temperature 73.4 °F | Instrumented Impact Total Energy; ASTM D 3763 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 69.0 µm/m-°C @Temperature -40.0 - 40.0 °C | 38.3 µin/in-°F @Temperature -40.0 - 104 °F | ASTM E 831 |
| 69.0 µm/m-°C @Temperature -40.0 - 40.0 °C | 38.3 µin/in-°F @Temperature -40.0 - 104 °F | ISO 11359-2 | |
| CTE, linear, Transverse to Flow | 74.0 µm/m-°C @Temperature -40.0 - 40.0 °C | 41.1 µin/in-°F @Temperature -40.0 - 104 °F | ASTM E 831 |
| 74.0 µm/m-°C @Temperature -40.0 - 40.0 °C | 41.1 µin/in-°F @Temperature -40.0 - 104 °F | ISO 11359-2 | |
| Deflection Temperature at 0.46 MPa (66 psi) | 120 °C @Thickness 3.20 mm | 248 °F @Thickness 0.126 in | unannealed; ASTM D 648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 95.0 °C | 203 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
| 98.0 °C @Thickness 3.20 mm | 208 °F @Thickness 0.126 in | unannealed; ASTM D 648 | |
| Vicat Softening Point | 130 °C | 266 °F | Rate B/50; ASTM D 1525 |
| 130 °C | 266 °F | Rate B/50; ISO 306 | |
| 132 °C | 270 °F | Rate B/120; ISO 306 | |