A. Schulman CP80-01 Linear Low-Density Polyethylene物性表参数

A. Schulman CP80-01 Linear Low-Density Polyethylene

A. Schulman CP80-01 Linear Low-Density Polyethylene 物性表: A. Schulman CP80-01 Linear Low-Density Polyethylene物性表及特性介绍,A. Schulman CP80-01 Linear Low-Density Polyethylene注塑参数详情,如需A. Schulman CP80-01 Linear Low-Density Polyethylene下载, 可到相关下载区下载

拉伸强度 [MPa]: 11.0
弯曲模量 [MPa]: 0.276

Physical Properties	Metric	English	Comments

Specific Gravity	0.922 g/cc	0.922 g/cc	ASTM D792
Melt Index of Compound	0.30 g/10 min	0.30 g/10 min	Condition E; ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	11.0 MPa	1600 psi	transverse direction; ASTM D882
	13.8 MPa	2000 psi	machine direction; ASTM D882
Elongation at Break	400 %	400 %	machine direction; ASTM D882
	500 %	500 %	transverse direction; ASTM D882
Flexural Modulus	0.276 GPa	40.0 ksi	1% secant - machine direction; ASTM D882
	0.310 GPa	45.0 ksi	1% secant - transverse direction; ASTM D882

Optical Properties	Metric	English	Comments
Gloss	55 %	55 %	ASTM D2457

Processing Properties	Metric	English	Comments
Melt Temperature	125 °C	257 °F

关键词:
供应
LLDPE
A. Schulman CP80-01 Linear Low-Density Polyethylene

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39787.html

免责声明: 本文 A. Schulman CP80-01 Linear Low-Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息