塑胶原料之家
  1. 首页
  2. 英文物性
  3. LLDPE
  4. Braskem Green PE SLL118/21 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethyle

Braskem Green PE SLL118/21 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethyle

Braskem Green PE SLL118/21 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethyle 物性表: Braskem Green PE SLL118/21 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethyle物性表及特性介绍,Braskem Green PE SLL118/21 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethyle注塑参数详情,如需Braskem Green PE SLL118/21 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethyle下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 1.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 0.917 g/cc0.917 g/ccASTM D1505/D792
Thickness 38.0 microns1.50 mil
Melt Flow 1.0 g/10 min
@Load 2.16 kg,
Temperature 190 °C		1.0 g/10 min
@Load 4.76 lb,
Temperature 374 °F		ASTM D1238
 
Mechanical PropertiesMetricEnglishComments
Film Elongation at Break, MD 1070 %1070 %ASTM D882
Film Elongation at Break, TD 1340 %1340 %ASTM D882
Elmendorf Tear Strength MD 180 g180 ggF; ASTM D1922
Elmendorf Tear Strength TD 400 g400 ggF; ASTM D1922
Dart drop Test 130 g0.287 lbg/F50; ASTM D1709
Film Tensile Strength at Break, MD 40.0 MPa5800 psiASTM D882
Film Tensile Strength at Break, TD 30.0 MPa4350 psiASTM D882
1% Secant Modulus, MD 210 MPa30500 psiASTM D882
1% Secant Modulus, TD 230 MPa33400 psiASTM D882
 
Optical PropertiesMetricEnglishComments
Haze 34 %34 %ASTM D1003
Gloss 47 %47 %60°; ASTM D2457

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39884.html

免责声明: 本文 Braskem Green PE SLL118/21 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethyle 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4