- 熔体流动速率 [g/10min]: 1.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Specific Gravity | 0.918 g/cc | 0.918 g/cc | ASTM D1505 | ||
Melt Flow | 1.0 g/10 min @Load 2.16 kg, Temperature 190 °C | 1.0 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D1238 | ||
Antiblock Level | 5000 ppm | 5000 ppm | |||
Slip Level | 1000 ppm | 1000 ppm | |||
Mechanical Properties | Metric | English | Comments | ||
Film Tensile Strength at Yield, MD | 14.0 MPa | 2030 psi | ASTM D882 | ||
Film Tensile Strength at Yield, TD | 10.0 MPa | 1450 psi | ASTM D882 | ||
Film Elongation at Break, MD | 450 % | 450 % | ASTM D882 | ||
Film Elongation at Break, TD | 600 % | 600 % | ASTM D882 | ||
Puncture Energy | 3.30 J | 2.43 ft-lb | ASTM D3763 | ||
Coefficient of Friction | 0.15 | 0.15 | ASTM D1894 | ||
Elmendorf Tear Strength, MD | 10.6 g/micron | 270 g/mil | ASTM D1922 | ||
Elmendorf Tear Strength, TD | 14.2 g/micron | 360 g/mil | ASTM D1922 | ||
Dart Drop | 23.6 g/micron | 600 g/mil | ASTM D1709 | ||
Film Tensile Strength at Break, MD | 59.0 MPa | 8560 psi | ASTM D882 | ||
Film Tensile Strength at Break, TD | 49.0 MPa | 7110 psi | ASTM D882 | ||
1% Secant Modulus, MD | 174 MPa | 25200 psi | ASTM D882 | ||
1% Secant Modulus, TD | 191 MPa | 27700 psi | ASTM D882 | ||
Heat Seal Strength Initiation Temperature | 102 °C | 216 °F | ASTM F882 | ||
Optical Properties | Metric | English | Comments | ||
Haze | 11 % | 11 % | ASTM D1003 | ||
Gloss | 93 % | 93 % | at 60°; ASTM D2457 | ||
Processing Properties | Metric | English | Comments | ||
Melt Temperature | 204 °C | 400 °F | |||
Blow-up Ratio (BUR) | 2.5 | 2.5 | |||
Descriptive Properties | |||||
Film Puncture Force | 46 N | ASTM D3763 |