Braskem BF0323HC Blown Film Extrusion Low Density Polyethylene物性表参数

Braskem BF0323HC Blown Film Extrusion Low Density Polyethylene

Braskem BF0323HC Blown Film Extrusion Low Density Polyethylene 物性表: Braskem BF0323HC Blown Film Extrusion Low Density Polyethylene物性表及特性介绍,Braskem BF0323HC Blown Film Extrusion Low Density Polyethylene注塑参数详情,如需Braskem BF0323HC Blown Film Extrusion Low Density Polyethylene下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 0.32

Physical Properties	Metric	English	Comments

Specific Gravity	0.923 g/cc	0.923 g/cc	ASTM D1505/D792
Thickness	38.0 microns	1.50 mil
Melt Flow	0.32 g/10 min @Load 2.16 kg, Temperature 190 °C	0.32 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Elongation at Break, MD	390 %	390 %	ASTM D882
Film Elongation at Break, TD	1040 %	1040 %	ASTM D882
Elmendorf Tear Strength TD	90 g	90 g	gF; ASTM D1922
Dart drop Test	100 g	0.221 lb	gF/50%f; ASTM D1709
Film Tensile Strength at Break, MD	40.0 MPa	5800 psi	ASTM D882
Film Tensile Strength at Break, TD	30.0 MPa	4350 psi	ASTM D882

Optical Properties	Metric	English	Comments
Haze	10 % @Thickness 0.0380 mm	10 % @Thickness 0.00150 in	ASTM D1003
Gloss	72 % @Thickness 0.0380 mm	72 % @Thickness 0.00150 in	60°; ASTM D2457

关键词:
LDPE
供应
Braskem BF0323HC Blown Film Extrusion Low Density Polyethylene

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-40942.html

免责声明: 本文 Braskem BF0323HC Blown Film Extrusion Low Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息