Dow 608A Low Density Polyethylene (LDPE)物性表参数

Dow 608A Low Density Polyethylene (LDPE)

Dow 608A Low Density Polyethylene (LDPE) 物性表: Dow 608A Low Density Polyethylene (LDPE)物性表及特性介绍,Dow 608A Low Density Polyethylene (LDPE)注塑参数详情,如需Dow 608A Low Density Polyethylene (LDPE)下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 2.6
密度 [g/cm3]: 0.923

Physical Properties	Metric	English	Comments

Density	0.923 g/cc	0.0333 lb/in³	ASTM D792
Thickness	50.8 microns	2.00 mil
Melt Flow	2.6 g/10 min	2.6 g/10 min	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	12.46 MPa	1807 psi	ASTM D882
Film Tensile Strength at Yield, TD	12.67 MPa	1837 psi	ASTM D882
Film Elongation at Break, MD	584 %	584 %	ASTM D882
Film Elongation at Break, TD	778 %	778 %	ASTM D882
Impact	42	42	[ft-lbf/in³]; Puncture Resistance; Dow Method
	2243	2243	[ft-lbf/in³]; Toughness MD; ASTM D882
	2499	2499	[ft-lbf/in³]; Toughness TD; ASTM D882
Elmendorf Tear Strength MD	447 g	447 g	ASTM D1922
Elmendorf Tear Strength TD	433 g	433 g	ASTM D1922
Elmendorf Tear Strength, MD	8.799 g/micron	223.5 g/mil	ASTM D1922
Elmendorf Tear Strength, TD	8.524 g/micron	216.5 g/mil	ASTM D1922
Dart drop Test	87.0 g	0.192 lb	Method A; ASTM D1709
Film Tensile Strength at Break, MD	23.41 MPa	3396 psi	ASTM D882
Film Tensile Strength at Break, TD	20.58 MPa	2985 psi	ASTM D882

Thermal Properties	Metric	English	Comments
Melting Point	113 °C	235 °F	Dow Method (DSC)
Vicat Softening Point	97.0 °C	207 °F	ASTM D1525

Optical Properties	Metric	English	Comments
Haze	5.7 %	5.7 %	ASTM D1003
Gloss	81 %	81 %	45°; ASTM D2457

关键词:
LDPE
供应
Dow 608A Low Density Polyethylene (LDPE)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-41150.html

免责声明: 本文 Dow 608A Low Density Polyethylene (LDPE) 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息