Dow 650I Low Density Polyethylene Resin物性表参数

Dow 650I Low Density Polyethylene Resin

Dow 650I Low Density Polyethylene Resin 物性表: Dow 650I Low Density Polyethylene Resin物性表及特性介绍,Dow 650I Low Density Polyethylene Resin注塑参数详情,如需Dow 650I Low Density Polyethylene Resin下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 2.0
密度 [g/cm3]: 0.928

Physical Properties	Metric	English	Comments

Density	0.928 g/cc	0.0335 lb/in³	ASTM D792
Thickness	50.8 microns	2.00 mil
Melt Flow	2.0 g/10 min @Load 2.16 kg, Temperature 190 °C	2.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	14.58 MPa	2115 psi	ASTM D882
Film Tensile Strength at Yield, TD	14.60 MPa	2118 psi	ASTM D882
Film Elongation at Break, MD	606 %	606 %	ASTM D882
Film Elongation at Break, TD	780 %	780 %	ASTM D882
Secant Modulus, MD	0.246998 GPa	35.8246 ksi	2% Secant; ASTM D882
Secant Modulus, TD	0.275128 GPa	39.9046 ksi	2% Secant; ASTM D882
Impact	32	32	[ft-lbf/in³]; Puncture Resistance; Dow Method
	2532	2532	[ft-lbf/in³]; Toughness MD; ASTM D882
	2640	2640	[ft-lbf/in³]; Toughness TD; ASTM D882
Elmendorf Tear Strength MD	379 g	379 g	ASTM D1922
Elmendorf Tear Strength TD	449 g	449 g	ASTM D1922
Elmendorf Tear Strength, MD	7.461 g/micron	189.5 g/mil	ASTM D1922
Elmendorf Tear Strength, TD	8.839 g/micron	224.5 g/mil	ASTM D1922
Dart drop Test	89.0 g	0.196 lb	Method A; ASTM D1709
Film Tensile Strength at Break, MD	24.24 MPa	3515 psi	ASTM D882
Film Tensile Strength at Break, TD	21.04 MPa	3051 psi	ASTM D882

Optical Properties	Metric	English	Comments
Haze	7.2 %	7.2 %	ASTM D1003
Gloss	77 %	77 %	45°; ASTM D2457

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-41158.html

免责声明: 本文 Dow 650I Low Density Polyethylene Resin 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息