Dow 662I Low Density Polyethylene Resin物性表参数

Dow 662I Low Density Polyethylene Resin

Dow 662I Low Density Polyethylene Resin 物性表: Dow 662I Low Density Polyethylene Resin物性表及特性介绍,Dow 662I Low Density Polyethylene Resin注塑参数详情,如需Dow 662I Low Density Polyethylene Resin下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 0.47
密度 [g/cm3]: 0.919

Physical Properties	Metric	English	Comments

Density	0.919 g/cc	0.0332 lb/in³	ASTM D792
Thickness	50.8 microns	2.00 mil
Melt Flow	0.47 g/10 min	0.47 g/10 min	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	13.30 MPa	1929 psi	ASTM D882
Film Tensile Strength at Yield, TD	10.73 MPa	1556 psi	ASTM D882
Film Elongation at Break, MD	339 %	339 %	ASTM D882
Film Elongation at Break, TD	557 %	557 %	ASTM D882
Impact	50	50	[ft-lbf/in³]; Puncture Resistance; Dow Method
	1543	1543	[ft-lbf/in³]; Toughness MD; ASTM D882
	1922	1922	[ft-lbf/in³]; Toughness TD; ASTM D882
Elmendorf Tear Strength MD	131 g	131 g	ASTM D1922
Elmendorf Tear Strength TD	112 g	112 g	ASTM D1922
Elmendorf Tear Strength, MD	2.58 g/micron	65.5 g/mil	ASTM D1922
Elmendorf Tear Strength, TD	2.20 g/micron	56.0 g/mil	ASTM D1922
Dart drop Test	283 g	0.624 lb	Method A; ASTM D1709
Film Tensile Strength at Break, MD	23.55 MPa	3416 psi	ASTM D882
Film Tensile Strength at Break, TD	24.1 MPa	3490 psi	ASTM D882

Thermal Properties	Metric	English	Comments
Melting Point	108 °C	226 °F	Dow Method (DSC)
Vicat Softening Point	93.0 °C	199 °F	ASTM D1525

Optical Properties	Metric	English	Comments
Haze	26 %	26 %	ASTM D1003
Gloss	23 %	23 %	45°; ASTM D2457

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-41160.html

免责声明: 本文 Dow 662I Low Density Polyethylene Resin 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息