LyondellBasell Purell® PE3220D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrus

LyondellBasell Purell® PE3220D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrus 物性表: LyondellBasell Purell® PE3220D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrus物性表及特性介绍,LyondellBasell Purell® PE3220D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrus注塑参数详情,如需LyondellBasell Purell® PE3220D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrus下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 0.4
  • 密度 [g/cm3]: 0.93
  • 拉伸强度 [MPa]: 16.5
  • 弯曲模量 [MPa]: 0.494
  • 热变形温度 [℃]: 48.0
 
Physical PropertiesMetricEnglishComments
Density 0.930 g/cc0.0336 lb/in³ASTM D1505
Melt Flow 0.40 g/10 min0.40 g/10 minASTM D1238
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 13.8 MPa2000 psiASTM D638
Tensile Strength, Yield 16.5 MPa2400 psiASTM D638
Elongation at Break 660 %660 %ASTM D638
Tensile Modulus 0.483 GPa70.0 ksi1% Secant; ASTM D638
Flexural Modulus 0.494 GPa71.6 ksi1% Secant; ASTM D790
 
Thermal PropertiesMetricEnglishComments
Deflection Temperature at 0.46 MPa (66 psi) 48.0 °C118 °FASTM D648
Vicat Softening Point 107 °C225 °FASTM D1525

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-41412.html

免责声明: 本文 LyondellBasell Purell® PE3220D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrus 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4