LyondellBasell Petrothene® NA373242 Low Density Polyethylene, Cast/Blown Film Grade物性表参数

LyondellBasell Petrothene® NA373242 Low Density Polyethylene, Cast/Blown Film Grade

LyondellBasell Petrothene® NA373242 Low Density Polyethylene, Cast/Blown Film Grade 物性表: LyondellBasell Petrothene® NA373242 Low Density Polyethylene, Cast/Blown Film Grade物性表及特性介绍,LyondellBasell Petrothene® NA373242 Low Density Polyethylene, Cast/Blown Film Grade注塑参数详情,如需LyondellBasell Petrothene® NA373242 Low Density Polyethylene, Cast/Blown Film Grade下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 3.0
密度 [g/cm3]: 0.924

Physical Properties	Metric	English	Comments

Density	0.924 g/cc	0.0334 lb/in³	ASTM D1505
Thickness	31.8 microns	1.25 mil	Cast, as tested
	31.8 microns	1.25 mil	Blown, as tested
Melt Flow	3.00 g/10 min	3.00 g/10 min	ASTM D1238
Antiblock Level	0.000 ppm	0.000 ppm
Slip Level	3900 ppm	3900 ppm

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	9.38 MPa	1360 psi	Cast; ASTM D822
	10.9 MPa	1580 psi	Blown; ASTM D822
Film Tensile Strength at Yield, TD	9.31 MPa	1350 psi	Cast; ASTM D822
	10.7 MPa	1550 psi	Blown; ASTM D822
Film Elongation at Break, MD	200 %	200 %	Blown; ASTM D822
	230 %	230 %	Cast; ASTM D822
Film Elongation at Break, TD	500 %	500 %	Blown; ASTM D822
	610 %	610 %	Cast; ASTM D822
Elmendorf Tear Strength MD	270 g	270 g	Blown; ASTM D1922
	300 g	300 g	Cast; ASTM D1922
Elmendorf Tear Strength TD	160 g	160 g	Cast; ASTM D1922
	170 g	170 g	Blown; ASTM D1922
Dart drop Test	65.0 g	0.143 lb	Blown; ASTM D1709, F₅₀
	110 g	0.243 lb	Cast; ASTM D1709, F₅₀
Film Tensile Strength at Break, MD	18.6 MPa	2700 psi	Blown; ASTM D822
	29.1 MPa	4220 psi	Cast; ASTM D822
Film Tensile Strength at Break, TD	17.0 MPa	2470 psi	Cast; ASTM D822
	17.2 MPa	2500 psi	Blown; ASTM D822
1% Secant Modulus, MD	159 MPa	23000 psi	Blown; ASTM D882
	208 MPa	30200 psi	Cast; ASTM D882
1% Secant Modulus, TD	172 MPa	25000 psi	Blown; ASTM D882
	197 MPa	28600 psi	Cast; ASTM D882

Optical Properties	Metric	English	Comments
Haze	3.40 %	3.40 %	Cast; ASTM D1003
	5.40 %	5.40 %	Blown; ASTM D1003
Gloss	70.0 %	70.0 %	Blown, 45°; ASTM D2457
	77.0 %	77.0 %	Cast, 45°; ASTM D2457

Processing Properties	Metric	English	Comments
Melt Temperature	191 °C	375 °F	Blown
	260 °C	500 °F	Cast

Compliance Properties	Metric	English	Comments
FDA	Yes	Yes

关键词:
LDPE
供应
LyondellBasell Petrothene® NA373242 Low Density Polyethylene
Cast/Blown Film Grade

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-41413.html

免责声明: 本文 LyondellBasell Petrothene® NA373242 Low Density Polyethylene, Cast/Blown Film Grade 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息