Arlon DiClad 880 PTFE/Woven Fiberglass Laminate

Arlon DiClad 880 PTFE/Woven Fiberglass Laminate 物性表: Arlon DiClad 880 PTFE/Woven Fiberglass Laminate物性表及特性介绍,Arlon DiClad 880 PTFE/Woven Fiberglass Laminate注塑参数详情,如需Arlon DiClad 880 PTFE/Woven Fiberglass Laminate下载, 可到相关下载区下载
  • 密度 [g/cm3]: 2.23
  • 吸水率 [%]: 0.02
  • 弯曲模量 [MPa]: 2.46
 
Physical PropertiesMetricEnglishComments
Density 2.23 g/cc0.0806 lb/in³ASTM D792 Method A
Water Absorption 0.020 %0.020 %IPC TM-650 2.6.2.2
Outgassing - Total Mass Loss  0.010 %
@Pressure <=1.33e-10 MPa,
Temperature 125 °C
0.010 %
@Pressure <=1.93e-8 psi,
Temperature 257 °F
Collected Volatiles; NASA SP-R-0022A
 0.010 %
@Pressure <=1.33e-10 MPa,
Temperature 125 °C
0.010 %
@Pressure <=1.93e-8 psi,
Temperature 257 °F
Water Vapor Recovered; NASA SP-R-0022A
 0.010 %
@Pressure <=1.33e-10 MPa,
Temperature 125 °C
0.010 %
@Pressure <=1.93e-8 psi,
Temperature 257 °F
NASA SP-R-0022A
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength 51.7 MPa7500 psiCross; ASTM D882
 55.8 MPa8100 psiMachine; ASTM D882
Modulus of Elasticity 1.39 GPa202 ksiCross; ASTM D638
 1.84 GPa267 ksiMachine; ASTM D638
Flexural Modulus >= 2.46 GPa>= 357 ksiASTM D790
Compressive Modulus 1.63 GPa237 ksiASTM D695
Peel Strength 2.45 kN/m14.0 pliAfter Thermal Stress; IPC TM-650 2.4.8
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.40e+15 ohm-cm1.40e+15 ohm-cmC96/35/90; IPC TM-650 2.5.17.1
Surface Resistance 2.90e+12 ohm2.90e+12 ohmC96/35/90; IPC TM-650 2.5.17.1
Dielectric Constant  2.17 - 2.2
@Frequency 1.00e+6 Hz
2.17 - 2.2
@Frequency 1.00e+6 Hz
C23/50; IPC TM-650 2.5.5.3
 2.17 - 2.2
@Frequency 1.00e+10 Hz
2.17 - 2.2
@Frequency 1.00e+10 Hz
C23/50; IPC TM-650 2.5.5.5
Dielectric Breakdown >= 45000 V>= 45000 VD48/50; ASTM D149
Dissipation Factor  0.00080
@Frequency 1.00e+6 Hz
0.00080
@Frequency 1.00e+6 Hz
C23/50; IPC TM-650 2.5.5.3
 0.00090
@Frequency 1.00e+10 Hz
0.00090
@Frequency 1.00e+10 Hz
C23/50; IPC TM-650 2.5.5.5
Arc Resistance >= 180 sec>= 180 secD48/50; ASTM D495
 
Thermal PropertiesMetricEnglishComments
CTE, linear  25.0 µm/m-°C
@Temperature 0.000 - 100 °C
13.9 µin/in-°F
@Temperature 32.0 - 212 °F
x direction; IPC TM-650 2.4.24
 34.0 µm/m-°C
@Temperature 0.000 - 100 °C
18.9 µin/in-°F
@Temperature 32.0 - 212 °F
y direction; IPC TM-650 2.4.24
CTE, linear, Transverse to Flow 252 µm/m-°C
@Temperature 0.000 - 100 °C
140 µin/in-°F
@Temperature 32.0 - 212 °F
z direction; IPC TM-650 2.4.24
Thermal Conductivity 0.261 W/m-K
@Temperature 100 °C
1.81 BTU-in/hr-ft²-°F
@Temperature 212 °F
ASTM E1225
Flammability, UL94 V-0V-0Vertical Burn
 
Descriptive Properties
Temperature Coefficient of Dielectric (ppm/°C)-160IPC TM-650 2.5.5.5 (-10 - 140°C)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43621.html

免责声明: 本文 Arlon DiClad 880 PTFE/Woven Fiberglass Laminate 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4