- 密度 [g/cm3]: 1.4
- 吸水率 [%]: 5.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.40 g/cc | 0.0506 lb/in³ | ISO 1183 | ||
Water Absorption | 5.0 % | 5.0 % | ISO 62 | ||
Moisture Absorption | 2.00 % | 2.00 % | ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
Linear Mold Shrinkage, Transverse | 0.0050 cm/cm | 0.0050 in/in | ISO 294-4, 2577 | ||
Mechanical Properties | Metric | English | Comments | ||
Ball Indentation Hardness | 115 MPa | 16700 psi | conditioned; ISO 2039-1 | ||
220 MPa | 31900 psi | dry; ISO 2039-1 | |||
Tensile Strength at Break | 130 MPa | 18900 psi | conditioned; ISO 527-1/-2 | ||
190 MPa | 27600 psi | dry; ISO 527-1/-2 | |||
Elongation at Break | 3.0 % | 3.0 % | dry; ISO 527-1/-2 | ||
6.0 % | 6.0 % | conditioned; ISO 527-1/-2 | |||
Tensile Modulus | 7.50 GPa | 1090 ksi | conditioned; ISO 527-1/-2 | ||
11.0 GPa | 1600 ksi | dry; ISO 527-1/-2 | |||
Charpy Impact Unnotched | 9.00 J/cm² | 42.8 ft-lb/in² | dry; ISO 179/1eU | ||
10.0 J/cm² | 47.6 ft-lb/in² | conditioned; ISO 179/1eU | |||
7.50 J/cm² @Temperature 30.0 °C | 35.7 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
8.50 J/cm² @Temperature 30.0 °C | 40.4 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Charpy Impact, Notched | 1.00 J/cm² | 4.76 ft-lb/in² | dry; ISO 179/1eA | ||
1.30 J/cm² | 6.19 ft-lb/in² | conditioned; ISO 179/1eA | |||
0.800 J/cm² @Temperature 30.0 °C | 3.81 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
0.800 J/cm² @Temperature 30.0 °C | 3.81 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
1.00e+14 ohm-cm | 1.00e+14 ohm-cm | dry; IEC 60093 | |||
Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
Dielectric Strength | 21.0 kV/mm | 533 kV/in | conditioned; IEC 60243-1 | ||
26.0 kV/mm | 660 kV/in | dry; IEC 60243-1 | |||
Comparative Tracking Index | 500 V | 500 V | conditioned; IEC 60112 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 20.0 µm/m-°C | 11.1 µin/in-°F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 70.0 µm/m-°C | 38.9 µin/in-°F | ISO 11359-1/-2 | ||
Melting Point | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 | ||
Maximum Service Temperature, Air | 130 - 150 °C | 266 - 302 °F | long term; EMS | ||
230 °C | 446 °F | short term; EMS | |||
Deflection Temperature at 1.8 MPa (264 psi) | 240 °C | 464 °F | ISO 75-1/-2 | ||
Deflection Temperature at 8.0 MPa | 175 °C | 347 °F | ISO 75-1/-2 | ||
Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
Descriptive Properties | |||||
Automotive | Cooling and climate control | ||||
Form | Granules | ||||
Industry & Consumer goods | Heating systems | ||||
Processing | Injection Molding | ||||
Product Attributes | High viscosity | ||||
Special Characteristics | Improved heat resistance |