塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA66
  4. DuPont Performance Polymers Zytel® 132F NC010 Nylon 66

DuPont Performance Polymers Zytel® 132F NC010 Nylon 66

DuPont Performance Polymers Zytel® 132F NC010 Nylon 66 物性表: DuPont Performance Polymers Zytel® 132F NC010 Nylon 66物性表及特性介绍,DuPont Performance Polymers Zytel® 132F NC010 Nylon 66注塑参数详情,如需DuPont Performance Polymers Zytel® 132F NC010 Nylon 66下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.14
  • 吸水率 [%]: 2.6
  • 成型收缩率 [%]: 0.011
  • 缺口冲击强度: 0.427
  • 拉伸强度 [MPa]: 60.0
  • 弯曲模量 [MPa]: 1.40
  • 硬度: 111.0
  • 热变形温度 [℃]: 225.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.14 g/cc1.14 g/ccDAM; ASTM D792
Density 1.14 g/cc0.0412 lb/in³DAM; ISO 1183
Water Absorption  2.6 %
@Temperature 23.0 °C		2.6 %
@Temperature 73.4 °F		Equilibrium 50%RH; DAM; ISO 62, Similar to
 8.5 %
@Temperature 23.0 °C		8.5 %
@Temperature 73.4 °F		Saturation, immersed; DAM; ISO 62, Similar to
Linear Mold Shrinkage  0.011 cm/cm
@Thickness 1.60 mm		0.011 in/in
@Thickness 0.0630 in		Flow; DAM
 0.012 cm/cm
@Thickness 3.20 mm		0.012 in/in
@Thickness 0.126 in		Flow; DAM
 0.015 cm/cm
@Thickness 1.60 mm		0.015 in/in
@Thickness 0.0630 in		Transverse; DAM
 0.016 cm/cm
@Thickness 3.20 mm		0.016 in/in
@Thickness 0.126 in		Transverse; DAM
Linear Mold Shrinkage, Flow 0.0090 cm/cm
@Thickness 2.00 mm		0.0090 in/in
@Thickness 0.0787 in		Parallel; DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.012 cm/cm
@Thickness 2.00 mm		0.012 in/in
@Thickness 0.0787 in		Normal; DAM; ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell R 11111150%RH; ASTM D785
 122122DAM; ASTM D785
Tensile Strength  65.5 MPa
@Temperature 23.0 °C		9500 psi
@Temperature 73.4 °F		50%RH; ASTM D638
 90.0 MPa
@Temperature 23.0 °C		13100 psi
@Temperature 73.4 °F		DAM; ASTM D638
Tensile Stress  14.8 MPa
@Strain 0.430 %,
Temperature 23.0 °C		2150 psi
@Strain 0.430 %,
Temperature 73.4 °F		DAM; ISO 527
 17.92 MPa
@Strain 5.00 %,
Temperature 150 °C		2599 psi
@Strain 5.00 %,
Temperature 302 °F		DAM; ISO 527
 18.65 MPa
@Strain 0.510 %,
Temperature 0.000 °C		2705 psi
@Strain 0.510 %,
Temperature 32.0 °F		DAM; ISO 527
 20.21 MPa
@Strain 4.13 %,
Temperature 100 °C		2931 psi
@Strain 4.13 %,
Temperature 212 °F		DAM; ISO 527
 25.03 MPa
@Strain 10.0 %,
Temperature 150 °C		3630 psi
@Strain 10.0 %,
Temperature 302 °F		DAM; ISO 527
 27.93 MPa
@Strain 0.710 %,
Temperature -40.0 °C		4051 psi
@Strain 0.710 %,
Temperature -40.0 °F		DAM; ISO 527
 27.97 MPa
@Strain 15.0 %,
Temperature 150 °C		4057 psi
@Strain 15.0 %,
Temperature 302 °F		DAM; ISO 527
 29.0 MPa
@Strain 0.860 %,
Temperature 23.0 °C		4210 psi
@Strain 0.860 %,
Temperature 73.4 °F		DAM; ISO 527
 29.51 MPa
@Strain 20.0 %,
Temperature 150 °C		4280 psi
@Strain 20.0 %,
Temperature 302 °F		DAM; ISO 527
 30.37 MPa
@Strain 25.0 %,
Temperature 150 °C		4405 psi
@Strain 25.0 %,
Temperature 302 °F		DAM; ISO 527
 30.38 MPa
@Strain 8.26 %,
Temperature 100 °C		4406 psi
@Strain 8.26 %,
Temperature 212 °F		DAM; ISO 527
 30.84 MPa
@Strain 30.0 %,
Temperature 150 °C		4473 psi
@Strain 30.0 %,
Temperature 302 °F		DAM; ISO 527
 31.08 MPa
@Strain 35.0 %,
Temperature 150 °C		4508 psi
@Strain 35.0 %,
Temperature 302 °F		DAM; ISO 527
 31.13 MPa
@Strain 45.0 %,
Temperature 150 °C		4515 psi
@Strain 45.0 %,
Temperature 302 °F		DAM; ISO 527
 31.18 MPa
@Strain 40.0 %,
Temperature 150 °C		4522 psi
@Strain 40.0 %,
Temperature 302 °F		DAM; ISO 527
 31.29 MPa
@Strain 50.0 %,
Temperature 150 °C		4538 psi
@Strain 50.0 %,
Temperature 302 °F		DAM; ISO 527
 35.52 MPa
@Strain 12.39 %,
Temperature 100 °C		5152 psi
@Strain 12.39 %,
Temperature 212 °F		DAM; ISO 527
 36.29 MPa
@Strain 1.02 %,
Temperature 0.000 °C		5263 psi
@Strain 1.02 %,
Temperature 32.0 °F		DAM; ISO 527
 38.45 MPa
@Strain 16.51 %,
Temperature 100 °C		5577 psi
@Strain 16.51 %,
Temperature 212 °F		DAM; ISO 527
 40.13 MPa
@Strain 20.64 %,
Temperature 100 °C		5820 psi
@Strain 20.64 %,
Temperature 212 °F		DAM; ISO 527
 41.12 MPa
@Strain 24.77 %,
Temperature 100 °C		5964 psi
@Strain 24.77 %,
Temperature 212 °F		DAM; ISO 527
 41.72 MPa
@Strain 28.9 %,
Temperature 100 °C		6051 psi
@Strain 28.9 %,
Temperature 212 °F		DAM; ISO 527
 42.02 MPa
@Strain 33.03 %,
Temperature 100 °C		6094 psi
@Strain 33.03 %,
Temperature 212 °F		DAM; ISO 527
 42.12 MPa
@Strain 37.16 %,
Temperature 100 °C		6109 psi
@Strain 37.16 %,
Temperature 212 °F		DAM; ISO 527
 42.32 MPa
@Strain 41.29 %,
Temperature 100 °C		6138 psi
@Strain 41.29 %,
Temperature 212 °F		DAM; ISO 527
 42.39 MPa
@Strain 1.29 %,
Temperature 23.0 °C		6148 psi
@Strain 1.29 %,
Temperature 73.4 °F		DAM; ISO 527
 52.48 MPa
@Strain 1.42 %,
Temperature -40.0 °C		7612 psi
@Strain 1.42 %,
Temperature -40.0 °F		DAM; ISO 527
 53.13 MPa
@Strain 1.53 %,
Temperature 0.000 °C		7706 psi
@Strain 1.53 %,
Temperature 32.0 °F		DAM; ISO 527
 56.16 MPa
@Strain 1.72 %,
Temperature 23.0 °C		8145 psi
@Strain 1.72 %,
Temperature 73.4 °F		DAM; ISO 527
 68.03 MPa
@Strain 2.15 %,
Temperature 23.0 °C		9867 psi
@Strain 2.15 %,
Temperature 73.4 °F		DAM; ISO 527
 68.75 MPa
@Strain 2.04 %,
Temperature 0.000 °C		9971 psi
@Strain 2.04 %,
Temperature 32.0 °F		DAM; ISO 527
 75.44 MPa
@Strain 2.13 %,
Temperature -40.0 °C		10940 psi
@Strain 2.13 %,
Temperature -40.0 °F		DAM; ISO 527
 77.92 MPa
@Strain 2.58 %,
Temperature 23.0 °C		11300 psi
@Strain 2.58 %,
Temperature 73.4 °F		DAM; ISO 527
 82.47 MPa
@Strain 2.55 %,
Temperature 0.000 °C		11960 psi
@Strain 2.55 %,
Temperature 32.0 °F		DAM; ISO 527
 84.8 MPa
@Strain 3.01 %,
Temperature 23.0 °C		12300 psi
@Strain 3.01 %,
Temperature 73.4 °F		DAM; ISO 527
 88.64 MPa
@Strain 3.44 %,
Temperature 23.0 °C		12860 psi
@Strain 3.44 %,
Temperature 73.4 °F		DAM; ISO 527
 89.68 MPa
@Strain 3.87 %,
Temperature 23.0 °C		13010 psi
@Strain 3.87 %,
Temperature 73.4 °F		DAM; ISO 527
 90.34 MPa
@Strain 4.30 %,
Temperature 23.0 °C		13100 psi
@Strain 4.30 %,
Temperature 73.4 °F		DAM; ISO 527
 93.35 MPa
@Strain 3.06 %,
Temperature 0.000 °C		13540 psi
@Strain 3.06 %,
Temperature 32.0 °F		DAM; ISO 527
 94.93 MPa
@Strain 2.83 %,
Temperature -40.0 °C		13770 psi
@Strain 2.83 %,
Temperature -40.0 °F		DAM; ISO 527
 100.6 MPa
@Strain 3.56 %,
Temperature 0.000 °C		14590 psi
@Strain 3.56 %,
Temperature 32.0 °F		DAM; ISO 527
 104.31 MPa
@Strain 4.07 %,
Temperature 0.000 °C		15129 psi
@Strain 4.07 %,
Temperature 32.0 °F		DAM; ISO 527
 105.74 MPa
@Strain 4.58 %,
Temperature 0.000 °C		15336 psi
@Strain 4.58 %,
Temperature 32.0 °F		DAM; ISO 527
 106.32 MPa
@Strain 5.09 %,
Temperature 0.000 °C		15420 psi
@Strain 5.09 %,
Temperature 32.0 °F		DAM; ISO 527
 110.53 MPa
@Strain 3.54 %,
Temperature -40.0 °C		16031 psi
@Strain 3.54 %,
Temperature -40.0 °F		DAM; ISO 527
 121.9 MPa
@Strain 4.25 %,
Temperature -40.0 °C		17680 psi
@Strain 4.25 %,
Temperature -40.0 °F		DAM; ISO 527
 128.87 MPa
@Strain 4.96 %,
Temperature -40.0 °C		18691 psi
@Strain 4.96 %,
Temperature -40.0 °F		DAM; ISO 527
 132.61 MPa
@Strain 5.67 %,
Temperature -40.0 °C		19233 psi
@Strain 5.67 %,
Temperature -40.0 °F		DAM; ISO 527
 134.25 MPa
@Strain 6.38 %,
Temperature -40.0 °C		19471 psi
@Strain 6.38 %,
Temperature -40.0 °F		DAM; ISO 527
 135.06 MPa
@Strain 7.09 %,
Temperature -40.0 °C		19589 psi
@Strain 7.09 %,
Temperature -40.0 °F		DAM; ISO 527
Tensile Strength, Yield  60.0 MPa
@Temperature 23.0 °C		8700 psi
@Temperature 73.4 °F		50%RH; ISO 527
 91.0 MPa
@Temperature 23.0 °C		13200 psi
@Temperature 73.4 °F		DAM; ISO 527
Elongation at Break  13 %
@Temperature 23.0 °C		13 %
@Temperature 73.4 °F		DAM; nominal; ISO 527
 20 %
@Temperature 23.0 °C		20 %
@Temperature 73.4 °F		50mm/min; DAM; ISO 527
 25 %
@Temperature 23.0 °C		25 %
@Temperature 73.4 °F		DAM; ASTM D638
 >= 50 %
@Temperature 23.0 °C		>= 50 %
@Temperature 73.4 °F		50%RH; nominal; ISO 527
 190 %
@Temperature 23.0 °C		190 %
@Temperature 73.4 °F		50%RH; ASTM D638
Elongation at Yield  4.5 %
@Temperature 23.0 °C		4.5 %
@Temperature 73.4 °F		DAM; ISO 527
 22 %
@Temperature 23.0 °C		22 %
@Temperature 73.4 °F		50%RH; ISO 527
Tensile Modulus  1.60 GPa
@Temperature 23.0 °C		232 ksi
@Temperature 73.4 °F		50%RH; ISO 527
 3.40 GPa
@Temperature 23.0 °C		493 ksi
@Temperature 73.4 °F		DAM; ISO 527
Flexural Modulus  1.40 GPa
@Temperature 23.0 °C		203 ksi
@Temperature 73.4 °F		50%RH; ISO 178
 1.62 GPa
@Temperature 23.0 °C		235 ksi
@Temperature 73.4 °F		50%RH; ASTM D790
 3.00 GPa
@Temperature 23.0 °C		435 ksi
@Temperature 73.4 °F		DAM; ISO 178
 3.10 GPa
@Temperature 23.0 °C		450 ksi
@Temperature 73.4 °F		DAM; ASTM D790
Izod Impact, Notched  0.427 J/cm
@Temperature 23.0 °C		0.800 ft-lb/in
@Temperature 73.4 °F		DAM; ASTM D256
 1.01 J/cm
@Temperature 23.0 °C		1.89 ft-lb/in
@Temperature 73.4 °F		50%RH; ASTM D256
Izod Impact, Notched (ISO)  2.00 kJ/m²
@Temperature -30.0 °C		0.952 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 180/1A
 4.00 kJ/m²
@Temperature -30.0 °C		1.90 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 180/1A
 4.00 kJ/m²
@Temperature 23.0 °C		1.90 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1A
 8.00 kJ/m²
@Temperature 23.0 °C		3.81 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 180/1A
Izod Impact, Unnotched (ISO)  300 kJ/m²
@Temperature 23.0 °C		143 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1U
 NB
@Temperature 23.0 °C		NB
@Temperature 73.4 °F		50%RH; ISO 180/1U
Charpy Impact Unnotched  20.0 J/cm²
@Temperature -30.0 °C		95.2 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eU
 30.0 J/cm²
@Temperature 23.0 °C		143 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eU
 NB
@Temperature 23.0 °C		NB
@Temperature 73.4 °F		50%RH; ISO 179/1eU
Charpy Impact, Notched  0.250 J/cm²
@Temperature -30.0 °C		1.19 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eA
 0.350 J/cm²
@Temperature -30.0 °C		1.67 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eA
 0.400 J/cm²
@Temperature 23.0 °C		1.90 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eA
 0.800 J/cm²
@Temperature 23.0 °C		3.81 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+15 ohm-cm
@Temperature 23.0 °C		1.00e+15 ohm-cm
@Temperature 73.4 °F		DAM; ASTM D257
Surface Resistance 1.00e+14 ohm
@Temperature 23.0 °C		1.00e+14 ohm
@Temperature 73.4 °F		DAM; ASTM D257
Dielectric Constant  3.6
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		3.6
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; ASTM D150
 3.9
@Frequency 1000 Hz,
Temperature 23.0 °C		3.9
@Frequency 1000 Hz,
Temperature 73.4 °F		DAM; ASTM D150
 4.0
@Frequency 100 Hz,
Temperature 23.0 °C		4.0
@Frequency 100 Hz,
Temperature 73.4 °F		DAM; ASTM D150
Dielectric Strength  15.4 kV/mm
@Thickness 3.20 mm,
Temperature 23.0 °C		391 kV/in
@Thickness 0.126 in,
Temperature 73.4 °F		DAM; Short Time; ASTM D149
 23.2 kV/mm
@Thickness 1.60 mm,
Temperature 23.0 °C		589 kV/in
@Thickness 0.0630 in,
Temperature 73.4 °F		DAM; Short Time; ASTM D149
Dissipation Factor  0.010
@Frequency 100 Hz,
Temperature 23.0 °C		0.010
@Frequency 100 Hz,
Temperature 73.4 °F		DAM; ASTM D150
 0.020
@Frequency 1000 Hz,
Temperature 23.0 °C		0.020
@Frequency 1000 Hz,
Temperature 73.4 °F		DAM; ASTM D150
 0.020
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.020
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; ASTM D150
Comparative Tracking Index  >= 600 V
@Thickness 3.00 mm,
Temperature 23.0 °C		>= 600 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 >= 600 V
@Thickness 3.00 mm,
Temperature 23.0 °C		>= 600 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 
Thermal PropertiesMetricEnglishComments
Melting Point 264 °C507 °FDAM; ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi) 225 °C437 °FDAM; ISO 75-1/-2
 235 °C455 °FDAM; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 70.0 °C158 °FDAM; ASTM D648
 75.0 °C167 °FDAM; ISO 75-1/-2
Glass Transition Temp, Tg 60.0 °C140 °F10°C/min; DAM; ISO 11357-1/-2
UL RTI, Electrical  130 °C
@Thickness 6.00 mm		266 °F
@Thickness 0.236 in		DAM; UL 746B
 130 °C
@Thickness 1.50 mm		266 °F
@Thickness 0.0591 in		DAM; UL 746B
 130 °C
@Thickness 0.710 mm		266 °F
@Thickness 0.0280 in		DAM; UL 746B
 130 °C
@Thickness 3.00 mm		266 °F
@Thickness 0.118 in		DAM; UL 746B
UL RTI, Mechanical with Impact  75.0 °C
@Thickness 0.710 mm		167 °F
@Thickness 0.0280 in		DAM; UL 746B
 75.0 °C
@Thickness 1.50 mm		167 °F
@Thickness 0.0591 in		DAM; UL 746B
 75.0 °C
@Thickness 3.00 mm		167 °F
@Thickness 0.118 in		DAM; UL 746B
 75.0 °C
@Thickness 6.00 mm		167 °F
@Thickness 0.236 in		DAM; UL 746B
UL RTI, Mechanical without Impact  85.0 °C
@Thickness 0.710 mm		185 °F
@Thickness 0.0280 in		DAM; UL 746B
 85.0 °C
@Thickness 6.00 mm		185 °F
@Thickness 0.236 in		DAM; UL 746B
 85.0 °C
@Thickness 3.00 mm		185 °F
@Thickness 0.118 in		DAM; UL 746B
 85.0 °C
@Thickness 1.50 mm		185 °F
@Thickness 0.0591 in		DAM; UL 746B
Flammability, UL94  V-2
@Thickness 1.50 mm		V-2
@Thickness 0.0591 in		DAM; IEC 60695-11-10
 V-2
@Thickness 3.00 mm		V-2
@Thickness 0.118 in		DAM; IEC 60695-11-10
 V-2
@Thickness 0.710 mm		V-2
@Thickness 0.0280 in		DAM; IEC 60695-11-10
 V-2
@Thickness 6.00 mm		V-2
@Thickness 0.236 in		DAM; IEC 60695-11-10
 V-2
@Thickness 1.50 mm		V-2
@Thickness 0.0591 in		DAM; UL94
 V-2
@Thickness 3.00 mm		V-2
@Thickness 0.118 in		DAM; UL94
 V-2
@Thickness 0.710 mm		V-2
@Thickness 0.0280 in		DAM; UL94
 V-2
@Thickness 6.00 mm		V-2
@Thickness 0.236 in		DAM; UL94
Oxygen Index 29 %29 %DAM; ISO 4589-1/-2
Glow Wire Test  725 °C
@Thickness 0.710 mm		1340 °F
@Thickness 0.0280 in		DAM; Ignition; IEC 60695-2-13
 750 °C
@Thickness 1.50 mm		1380 °F
@Thickness 0.0591 in		DAM; Ignition; IEC 60695-2-13
 800 °C
@Thickness 3.00 mm		1470 °F
@Thickness 0.118 in		DAM; Ignition; IEC 60695-2-13
 800 °C
@Thickness 6.00 mm		1470 °F
@Thickness 0.236 in		DAM; Ignition; IEC 60695-2-13
 960 °C
@Thickness 6.00 mm		1760 °F
@Thickness 0.236 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 0.710 mm		1760 °F
@Thickness 0.0280 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 3.00 mm		1760 °F
@Thickness 0.118 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 1.50 mm		1760 °F
@Thickness 0.0591 in		DAM; IEC 60695-2-12
 
Processing PropertiesMetricEnglishComments
Melt Temperature 262 °C504 °F10°C/min; DAM; ISO 11357-1/-3
 290 °C554 °FDAM; Optimum
 280 - 300 °C536 - 572 °FDAM
Mold Temperature 70.0 °C158 °FDAM; optimum
 50.0 - 90.0 °C122 - 194 °FDAM
Drying Temperature 80.0 °C176 °FDAM
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
Moisture Content <= 0.20 %<= 0.20 %DAM
 
Descriptive Properties
AdditiveLubricantDAM
 Mold ReleaseDAM
 Nucleating AgentDAM
AppearanceNatural ColorDAM
Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
FeaturesCycle (Production), FastDAM
 Electrical Properties, GoodDAM
 LubricatedDAM
 LubricatedDAM
 NucleatedDAM
 NucleatedDAM
FormsPelletsDAM
GenericNylon 66DAM
Material StatusCurrentDAM
Part Marking Code>PA66<ISO 11469; DAM
Polymer FamilyPolyamideDAM
Polymer TypePA66DAM
Processing MethodInjection MoldingDAM
Product CategoryFast Cycle ResinsDAM
 Unreinforced ResinsDAM
Region Available - GlobalYesDAM
Resin IdentificationPA66ISO 1043; DAM
RoHS ComplianceContact ManufacturerDAM
Ultrasonic WeldableYesDAM
UsesBearingsDAM
 ConnectorsDAM
 GearsDAM

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45453.html

免责声明: 本文 DuPont Performance Polymers Zytel® 132F NC010 Nylon 66 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4