- 密度 [g/cm3]: 1.07
- 吸水率 [%]: 1.1
- 拉伸强度 [MPa]: 53.0
- 弯曲模量 [MPa]: 1.40
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.07 g/cc | 0.0387 lb/in³ | ISO data |
| Water Absorption | 1.1 % | 1.1 % | 24 hrs; ISO data |
| Moisture Absorption at Equilibrium | 1.9 % | 1.9 % | 50% RH; 23°C; ISO data |
| Water Absorption at Saturation | 6.7 % | 6.7 % | in water; 23°C; ISO data |
| Linear Mold Shrinkage | 0.0050 cm/cm | 0.0050 in/in | ISO data |
| 0.014 cm/cm | 0.014 in/in | ASTM data MD | |
| Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | ISO Data |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 53.0 MPa | 7690 psi | ISO value at 50 mm/min. |
| 55.0 MPa | 7980 psi | ASTM value at 50 mm/min. | |
| Elongation at Break | >= 50 % | >= 50 % | Nominal strain at break, ISO data, 50 mm/min |
| >= 100 % | >= 100 % | Nominal strain at break, ASTM, 50 mm/min | |
| Flexural Modulus | 1.40 GPa | 203 ksi | ISO Value |
| 1.69 GPa | 245 ksi | ASTM Value | |
| Poissons Ratio | 0.35 | 0.35 | ISO data |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | ISO data |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 106 µm/m-°C @Temperature 20.0 °C | 58.9 µin/in-°F @Temperature 68.0 °F | ASTM data |
| Melting Point | 220 °C | 428 °F | ASTM and ISO test |
| Deflection Temperature at 1.8 MPa (264 psi) | 55.0 °C | 131 °F | ASTM Data |
| Flammability, UL94 | HB @Thickness 0.810 mm | HB @Thickness 0.0319 in | |
| HB @Thickness 3.00 mm | HB @Thickness 0.118 in | ||
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 275 °C | 527 °F | See Materials Notes |
| Mold Temperature | 95.0 °C | 203 °F | See Materials Notes |
| Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |