- 密度 [g/cm3]: 1.34
- 断裂伸长率 [%]: 140
- 弯曲强度 [MPa]: 90.0
- 弯曲模量 [MPa]: 4.83
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.34 g/cc | 0.0484 lb/in³ | (Dry) |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | ASTM Data MD (Dry) |
| Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | ISO Data (Dry) |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 90.0 MPa | 13100 psi | Same value from ASTM and ISO tests; 5 mm/min. |
| Elongation at Break | 6.0 % | 6.0 % | Strain at break, ASTM, 5 mm/min |
| 6.0 % | 6.0 % | Strain at break, ISO, 5 mm/min | |
| Tensile Modulus | 4.61 GPa | 669 ksi | same value from ASTM and ISO test. |
| Flexural Yield Strength | 140 MPa | 20300 psi | ASTM Data |
| Flexural Modulus | 4.83 GPa | 701 ksi | ASTM Data |
| Thermal Properties | Metric | English | Comments |
| Melting Point | 220 °C | 428 °F | (Dry) |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 275 °C | 527 °F | See Materials Notes |
| Mold Temperature | 95.0 °C | 203 °F | See Materials Notes |
| Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |