- 密度 [g/cm3]: 1.44
- 吸水率 [%]: 0.8
- 拉伸强度 [MPa]: 45.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.44 g/cc | 0.0520 lb/in³ | ISO 1183 | ||
Water Absorption | 0.80 % | 0.80 % | ISO 62 | ||
Moisture Absorption | 0.400 % | 0.400 % | ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0080 cm/cm | 0.0080 in/in | ISO 294-4, 2577 | ||
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | ISO 294-4, 2577 | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Shore D | 75 | 75 | conditioned, 15s; ISO 868 | ||
Tensile Strength at Break | 40.0 MPa | 5800 psi | conditioned; ISO 527-1/-2 | ||
50.0 MPa | 7250 psi | dry; ISO 527-1/-2 | |||
Tensile Strength, Yield | 45.0 MPa | 6530 psi | dry; ISO 527-1/-2 | ||
50.0 MPa | 7250 psi | dry; ISO 527-1/-2 | |||
Elongation at Break | 20 % | 20 % | dry; ISO 527-1/-2 | ||
25 % | 25 % | conditioned; ISO 527-1/-2 | |||
Elongation at Yield | 5.0 % | 5.0 % | dry; ISO 527-1/-2 | ||
7.0 % | 7.0 % | conditioned; ISO 527-1/-2 | |||
Tensile Modulus | 2.30 GPa | 334 ksi | conditioned; ISO 527-1/-2 | ||
2.60 GPa | 377 ksi | dry; ISO 527-1/-2 | |||
Charpy Impact Unnotched | 11.0 J/cm² | 52.3 ft-lb/in² | conditioned; ISO 179/1eU | ||
13.0 J/cm² | 61.9 ft-lb/in² | dry; ISO 179/1eU | |||
6.50 J/cm² @Temperature 30.0 °C | 30.9 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | dry; ISO 179/1eA | ||
0.500 J/cm² | 2.38 ft-lb/in² | conditioned; ISO 179/1eA | |||
0.400 J/cm² @Temperature 30.0 °C | 1.90 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
0.400 J/cm² @Temperature 30.0 °C | 1.90 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
Dielectric Strength | 35.0 kV/mm | 889 kV/in | conditioned; IEC 60243-1 | ||
Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 120 µm/m-°C | 66.7 µin/in-°F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 120 µm/m-°C | 66.7 µin/in-°F | ISO 11359-1/-2 | ||
Melting Point | 178 °C | 352 °F | 10°C/min; ISO 11357-1/-3 | ||
Maximum Service Temperature, Air | 90.0 - 120 °C | 194 - 248 °F | long term; EMS | ||
150 °C | 302 °F | short term; EMS | |||
Deflection Temperature at 1.8 MPa (264 psi) | 65.0 °C | 149 °F | ISO 75-1/-2 | ||
Deflection Temperature at 8.0 MPa | 40.0 °C | 104 °F | ISO 75-1/-2 | ||
Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
Descriptive Properties | |||||
Automotive | Automotive electr. and electronics, lighting | ||||
Powertrain and Chassis | |||||
Electricals & Electronics | Connectors | ||||
Electrical appliances | |||||
Electrical equipment | |||||
Mobile phones and other portable devices | |||||
Form | Granules | ||||
Industry & Consumer goods | Housewares | ||||
Mechanical Engineering | |||||
Medical devices | |||||
Sanitary, water and gas supply | |||||
Tools & Accessories | |||||
Processing | Injection Molding | ||||
Special Characteristics | Improved UV resistance (outdoor use) | ||||
Water Contact | ACS | ||||
DVGW W270 | |||||
WRAS |