PolyOne Therma-Tech™ NJ-6000C TC Nylon 12

PolyOne Therma-Tech™ NJ-6000C TC Nylon 12 物性表: PolyOne Therma-Tech™ NJ-6000C TC Nylon 12物性表及特性介绍,PolyOne Therma-Tech™ NJ-6000C TC Nylon 12注塑参数详情,如需PolyOne Therma-Tech™ NJ-6000C TC Nylon 12下载, 可到相关下载区下载
  • 吸水率 [%]: 0.1
  • 缺口冲击强度: 0.267
  • 弯曲模量 [MPa]: 13.8
  • 热变形温度 [℃]: 193.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.65 g/cc1.65 g/ccASTM D792
Water Absorption 0.10 %
@Thickness 3.17 mm
0.10 %
@Thickness 0.125 in
24 hr. Immersion; ASTM D570
Linear Mold Shrinkage 0.0020 - 0.0030 cm/cm0.0020 - 0.0030 in/inASTM D955
 
Mechanical PropertiesMetricEnglishComments
Elongation at Break 0.60 %0.60 %Type 1 - Rigids, 0.2 in/min; ASTM D638
Tensile Modulus 19.3 GPa2800 ksiType 1 - Rigids, 0.2 in/min; ASTM D638
Flexural Strength 99.3 MPa14400 psiASTM D790
Flexural Modulus 13.8 GPa2000 ksiASTM D790
Izod Impact, Notched 0.267 J/cm
@Thickness 6.35 mm,
Temperature 23.0 °C
0.500 ft-lb/in
@Thickness 0.250 in,
Temperature 73.4 °F
Method A, Injection Molded; ASTM D256
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+15 - 1.00e+16 ohm-cm1.00e+15 - 1.00e+16 ohm-cmASTM D257
Surface Resistivity per Square 1.00e+13 - 1.00e+14 ohm1.00e+13 - 1.00e+14 ohmASTM D257
 
Thermal PropertiesMetricEnglishComments
Thermal Conductivity 2.00 - 3.00 W/m-K13.9 - 20.8 BTU-in/hr-ft²-°FASTM C177
Deflection Temperature at 0.46 MPa (66 psi) 193 °C380 °FUnannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 185 °C365 °FUnannealed; ASTM D648
 
Processing PropertiesMetricEnglishComments
Melt Temperature 260 - 277 °C500 - 530 °FMolding
Mold Temperature 65.6 - 93.3 °C150 - 200 °F

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46986.html

免责声明: 本文 PolyOne Therma-Tech™ NJ-6000C TC Nylon 12 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4