PolyOne Edgetek® NJ-000/000 Nylon 12

PolyOne Edgetek® NJ-000/000 Nylon 12 物性表: PolyOne Edgetek® NJ-000/000 Nylon 12物性表及特性介绍,PolyOne Edgetek® NJ-000/000 Nylon 12注塑参数详情,如需PolyOne Edgetek® NJ-000/000 Nylon 12下载, 可到相关下载区下载
  • 吸水率 [%]: 0.8
  • 缺口冲击强度: 0.481
  • 弯曲强度 [MPa]: 53.8
  • 弯曲模量 [MPa]: 1.42
  • 热变形温度 [℃]: 143.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.03 g/cc1.03 g/ccASTM D792
Water Absorption 0.80 %0.80 %24 hr. Immersion; ASTM D570
Water Absorption at Saturation 1.5 %1.5 %Long-Term Immersion; ASTM D570
Linear Mold Shrinkage 0.014 cm/cm0.014 in/inASTM D955
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 53.8 MPa7800 psiType 1 - Rigids, 0.2 in/min; ASTM D638
Elongation at Break 250 %250 %Type 1 - Rigids, 0.2 in/min; ASTM D638
Flexural Strength 5.45 MPa790 psiASTM D790
Flexural Modulus 1.42 GPa206 ksiASTM D790
Izod Impact, Notched 0.481 J/cm
@Thickness 6.35 mm,
Temperature 23.0 °C
0.900 ft-lb/in
@Thickness 0.250 in,
Temperature 73.4 °F
Method A, Injection Molded; ASTM D256
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmASTM D257
 
Thermal PropertiesMetricEnglishComments
Deflection Temperature at 0.46 MPa (66 psi) 143 °C290 °FAnnealed, 0.125 in bars; ASTM D648
 
Processing PropertiesMetricEnglishComments
Melt Temperature 232 °C450 °FMolding
Drying Temperature 54.4 °C130 °F
Dry Time 2 hour2 hour
 
Descriptive Properties
Product FormPellets

**
Materials flagged as discontinued () are no longer part of the manufacturer’s standard product line according to our latest information. These materials may be available by special order, in distribution inventory, or reinstated as an active product. Data sheets from materials that are no longer available remain in MatWeb to assist users in finding replacement materials.

Users of our Advanced Search (registration required) may exclude discontinued materials from search results.

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46980.html

免责声明: 本文 PolyOne Edgetek® NJ-000/000 Nylon 12 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4