Evonik Corporation Vestamid® L1621 sw (as-conditioned) Nylon 12

Evonik Corporation Vestamid® L1621 sw (as-conditioned) Nylon 12 物性表: Evonik Corporation Vestamid® L1621 sw (as-conditioned) Nylon 12物性表及特性介绍,Evonik Corporation Vestamid® L1621 sw (as-conditioned) Nylon 12注塑参数详情,如需Evonik Corporation Vestamid® L1621 sw (as-conditioned) Nylon 12下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.03
  • 拉伸强度 [MPa]: 31.0
  • 热变形温度 [℃]: 110.0
 
Physical PropertiesMetricEnglishComments
Density 1.03 g/cc0.0372 lb/in³
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 31.0 MPa4500 psi
Elongation at Break >= 50 %>= 50 %
Elongation at Yield 23 %23 %
Modulus of Elasticity 0.600 GPa87.0 ksi
Charpy Impact Unnotched NBNB
 NB
@Temperature -30.0 °C
NB
@Temperature -22.0 °F
Charpy Impact, Notched 1.90 J/cm²9.04 ft-lb/in²
 0.600 J/cm²
@Temperature -30.0 °C
2.86 ft-lb/in²
@Temperature -22.0 °F
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 8.00e+11 ohm-cm8.00e+11 ohm-cm
Surface Resistance 3.00e+13 ohm3.00e+13 ohm
Dielectric Constant  3.0
@Frequency 1e+6 Hz
3.0
@Frequency 1e+6 Hz
 10
@Frequency 100 Hz
10
@Frequency 100 Hz
Dielectric Strength 33.0 kV/mm838 kV/in
Dissipation Factor  0.10
@Frequency 1e+6 Hz
0.10
@Frequency 1e+6 Hz
 0.17
@Frequency 100 Hz
0.17
@Frequency 100 Hz
 
Thermal PropertiesMetricEnglishComments
CTE, linear <= 50.0 µm/m-°C
@Temperature 20.0 °C
<= 27.8 µin/in-°F
@Temperature 68.0 °F
Deflection Temperature at 0.46 MPa (66 psi) 110 °C230 °F
Deflection Temperature at 1.8 MPa (264 psi) 45.0 °C113 °F
Vicat Softening Point 135 °C275 °F50°C/hr/50 N

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46996.html

免责声明: 本文 Evonik Corporation Vestamid® L1621 sw (as-conditioned) Nylon 12 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4