GEHR Plastics PEEK-mod Polyetheretherketone, 10% PTFE, 10% Graphite, 10% Carbon Fiber

GEHR Plastics PEEK-mod Polyetheretherketone, 10% PTFE, 10% Graphite, 10% Carbon Fiber 物性表: GEHR Plastics PEEK-mod Polyetheretherketone, 10% PTFE, 10% Graphite, 10% Carbon Fiber物性表及特性介绍,GEHR Plastics PEEK-mod Polyetheretherketone, 10% PTFE, 10% Graphite, 10% Carbon Fiber注塑参数详情,如需GEHR Plastics PEEK-mod Polyetheretherketone, 10% PTFE, 10% Graphite, 10% Carbon Fiber下载, 可到相关下载区下载
  • 吸水率 [%]: 0.06
  • 拉伸强度 [MPa]: 141.0
  • 热变形温度 [℃]: 293.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.48 g/cc1.48 g/ccISO 1183
Water Absorption 0.060 %0.060 %ISO 62
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore D 8787DIN 53505
Tensile Strength at Break 118 MPa17100 psiISO 527
Tensile Strength, Yield 141 MPa20500 psiISO 527
Elongation at Break 3.0 %3.0 %ISO 527
Modulus of Elasticity 8.10 GPa1170 ksiISO 527
Flexural Strength 210 MPa30500 psi3.5%; ISO 178
Charpy Impact Unnotched 2.75 J/cm²13.1 ft-lb/in²ISO 179
Charpy Impact, Notched 0.630 J/cm²3.00 ft-lb/in²ISO 179
Coefficient of Friction 0.110.11DIN 53375
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity >= 100000 ohm-cm>= 100000 ohm-cmVDE 0303
Surface Resistivity per Square >= 1.00e+7 ohm>= 1.00e+7 ohmVDE 0303
Dielectric Strength 24.5 kV/mm622 kV/inVDE 0303
 
Thermal PropertiesMetricEnglishComments
CTE, linear 22.0 µm/m-°C
@Temperature 20.0 °C
12.2 µin/in-°F
@Temperature 68.0 °F
DIN 53752
Thermal Conductivity 0.240 W/m-K1.67 BTU-in/hr-ft²-°FDIN 52612
Maximum Service Temperature, Air 260 °C500 °F
Deflection Temperature at 0.46 MPa (66 psi) 293 °C559 °FISO 75
Deflection Temperature at 1.8 MPa (264 psi) 277 °C531 °FISO 75
Minimum Service Temperature, Air -40.0 °C-40.0 °F
Flammability, UL94 V-0V-0
 
Descriptive Properties
Acid Resistancelimited
Aromatic Resistanceyes
Bondabilitylimited
CKW Resistancelimited
ColorBlack
Hydrocarbonate Resistanceyes
Hydroxide Resistanceyes
Ketone Resistanceyes
Physiological indifference accordingno
Resistance Against Hot Wateryes
UV Stabilizationyes

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49826.html

免责声明: 本文 GEHR Plastics PEEK-mod Polyetheretherketone, 10% PTFE, 10% Graphite, 10% Carbon Fiber 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4