PA6 PZ0052E 25%玻璃，注射成型、_产品资讯

PA6 PZ0052E 聚酰胺俗称尼龙（Nylon），英文名称Polyamide（简称PA），是分子主链上含有重复酰胺基团—[NHCO]—的热塑性树脂总称。包括脂肪族PA，脂肪—芳香族PA和芳香族PA。其中，脂肪族PA品种多，产量大，应用广泛，其命名由合成单体具体的碳原子数而定。

颗粒图：

、

用途：

广泛应用于机械、仪器仪表、汽车部件、电子电气、铁路、家电、通讯、纺机、体育休闲用品、油管、油箱及一些精密工程制品。

电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座。

汽车：散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座。

工业零件：椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输。

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com

物性表:

Physical Properties	Metric	English	Comments

Density	1.38 g/cc	0.0499 lb/in³	ASTM D792
Moisture Absorption	1.05 % @Temperature 23.0 °C	1.05 % @Temperature 73.4 °F	50% RH; ASMT D570
Linear Mold Shrinkage, Flow	0.0040 - 0.0060 cm/cm @Time 86400 sec	0.0040 - 0.0060 in/in @Time 24.0 hour	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	82.0 MPa	11900 psi	ISO 527
	103 MPa	14900 psi	ASTM D638
Elongation at Break	2.3 %	2.3 %	ASTM D638
	2.5 %	2.5 %	ISO 527
Tensile Modulus	6.10 GPa	885 ksi	1 mm/min; ISO 527
	7.44 GPa	1080 ksi	50 mm/min; ASTM D638
Flexural Strength	120 MPa	17400 psi	ISO 178
	144 MPa	20900 psi	ASTM D790
Flexural Modulus	5.20 GPa	754 ksi	ISO 178
	7.10 GPa	1030 ksi	ASTM D790
Izod Impact, Notched	0.530 J/cm	0.993 ft-lb/in	ASTM D256
Izod Impact, Notched (ISO)	3.00 kJ/m²	1.43 ft-lb/in²	80x10x4; ISO 180/1A
Izod Impact, Unnotched (ISO)	25.0 kJ/m²	11.9 ft-lb/in²	80x10x4; ISO 180/1U
Impact Test	8.00 J	5.90 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
	8.00 J	5.90 ft-lb	Multiaxial; ISO 6603

Electrical Properties	Metric	English	Comments
Comparative Tracking Index	400 - 600 V	400 - 600 V	PLC 1
Hot Wire Ignition, HWI	30 - 60 sec @Thickness 0.750 mm	30 - 60 sec @Thickness 0.0295 in	PLC 2
	30 - 60 sec @Thickness 1.50 mm	30 - 60 sec @Thickness 0.0591 in	PLC 2
	30 - 60 sec @Thickness 3.00 mm	30 - 60 sec @Thickness 0.118 in	PLC 2
High Amp Arc Ignition, HAI	>= 120 arcs @Thickness 0.750 mm	>= 120 arcs @Thickness 0.0295 in	PLC 0
	>= 120 arcs @Thickness 1.50 mm	>= 120 arcs @Thickness 0.0591 in	PLC 0
	>= 120 arcs @Thickness 3.00 mm	>= 120 arcs @Thickness 0.118 in	PLC 0

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	32.4 µm/m-°C @Temperature -40.0 - 40.0 °C	18.0 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E831
Deflection Temperature at 0.46 MPa (66 psi)	215 °C @Thickness 3.20 mm	419 °F @Thickness 0.126 in	unannealed; ASMT D648
Deflection Temperature at 1.8 MPa (264 psi)	137 °C	279 °F	Flatw 80x10x4, sp=64 mm; ISO 75/Af
	204 °C @Thickness 3.20 mm	399 °F @Thickness 0.126 in	unannealed; ASMT D648
UL RTI, Electrical	125 °C @Thickness 0.750 mm	257 °F @Thickness 0.0295 in
	125 °C @Thickness 1.50 mm	257 °F @Thickness 0.0591 in
	125 °C @Thickness 3.00 mm	257 °F @Thickness 0.118 in
UL RTI, Mechanical with Impact	125 °C @Thickness 0.750 mm	257 °F @Thickness 0.0295 in
	125 °C @Thickness 1.50 mm	257 °F @Thickness 0.0591 in
	125 °C @Thickness 3.00 mm	257 °F @Thickness 0.118 in
UL RTI, Mechanical without Impact	130 °C @Thickness 0.750 mm	266 °F @Thickness 0.0295 in
	130 °C @Thickness 1.50 mm	266 °F @Thickness 0.0591 in
	140 °C @Thickness 3.00 mm	284 °F @Thickness 0.118 in
Flammability, UL94	V-2 @Thickness 0.750 mm	V-2 @Thickness 0.0295 in	IEC 60695-11-10
	V-2 @Thickness 1.50 mm	V-2 @Thickness 0.0591 in	IEC 60695-11-10
	V-2 @Thickness 3.00 mm	V-2 @Thickness 0.118 in	IEC 60695-11-10
Oxygen Index	>= 20 %	>= 20 %	ISO 4589
Glow Wire Test	960 °C @Thickness 1.60 mm	1760 °F @Thickness 0.0630 in	IEC 60695-2-12

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	240 - 250 °C	464 - 482 °F	Zone 1
Middle Barrel Temperature	250 - 260 °C	482 - 500 °F	Zone 2
Front Barrel Temperature	250 - 270 °C	482 - 518 °F	Zone 3
Melt Temperature	250 - 270 °C	482 - 518 °F
Mold Temperature	50.0 - 90.0 °C	122 - 194 °F
Drying Temperature	80.0 °C	176 °F
Dry Time	4.00 hour	4.00 hour
Moisture Content	0.20 %	0.20 %

Descriptive Properties
UL f1	f1