类别:聚合物;热塑性;聚甲醛(POM);缩醛均聚物,无筋
材料说明:极低排放的高粘度缩醛均聚物
聚甲醛100pe NC010(原de20573)是一种高粘度缩醛均聚物增强版的Delrin 100P具有非常低的挥发性有机化合物的排放。它具有最好的组合强度和韧性
物性表:Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.19 g/cc | 0.0430 lb/in³ | |||
1.42 g/cc | 0.0513 lb/in³ | ISO 1183 | |||
Viscosity | 134900 cP @Shear Rate 5000 1/s, Temperature 230 °C |
134900 cP @Shear Rate 5000 1/s, Temperature 446 °F |
ISO 11403-1 -2 | ||
151800 cP @Shear Rate 5000 1/s, Temperature 215 °C |
151800 cP @Shear Rate 5000 1/s, Temperature 419 °F |
ISO 11403-1 -2 | |||
167300 cP @Shear Rate 5000 1/s, Temperature 200 °C |
167300 cP @Shear Rate 5000 1/s, Temperature 392 °F |
ISO 11403-1 -2 | |||
697800 cP @Shear Rate 500 1/s, Temperature 230 °C |
697800 cP @Shear Rate 500 1/s, Temperature 446 °F |
ISO 11403-1 -2 | |||
779300 cP @Shear Rate 500 1/s, Temperature 215 °C |
779300 cP @Shear Rate 500 1/s, Temperature 419 °F |
ISO 11403-1 -2 | |||
875100 cP @Shear Rate 500 1/s, Temperature 200 °C |
875100 cP @Shear Rate 500 1/s, Temperature 392 °F |
ISO 11403-1 -2 | |||
Linear Mold Shrinkage, Flow | 0.022 cm/cm | 0.022 in/in | ISO 294-4 2577 | ||
Linear Mold Shrinkage, Transverse | 0.018 cm/cm | 0.018 in/in | ISO 294-4 2577 | ||
Melt Flow | 2.1 g/10 min @Load 2.16 kg, Temperature 190 °C |
2.1 g/10 min @Load 4.76 lb, Temperature 374 °F |
cm³/10min; ISO 1133 | ||
2.5 g/10 min @Load 2.16 kg, Temperature 190 °C |
2.5 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 | |||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Rockwell M | 91 | 91 | ISO 2039-2 | ||
Hardness, Rockwell R | 121 | 121 | ISO 2039-2 | ||
Tensile Strength, Yield | 72.0 MPa | 10400 psi | ISO 527-1/-2 | ||
Elongation at Break | 45 % | 45 % | Nominal; ISO 527-1/-2 | ||
Elongation at Yield | 26 % | 26 % | ISO 527-1/-2 | ||
Tensile Modulus | 3.10 GPa | 450 ksi | ISO 527-1/-2 | ||
Flexural Strength | 79.0 MPa @Strain 3.50 % |
11500 psi @Strain 3.50 % |
ISO 178 | ||
Flexural Modulus | 2.90 GPa | 421 ksi | ISO 178 | ||
Charpy Impact Unnotched | NB | NB | ISO 179/1eU | ||
40.0 J/cm² @Temperature -30.0 °C |
190 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU | |||
Charpy Impact, Notched | 1.50 J/cm² | 7.14 ft-lb/in² | ISO 179/1eA | ||
1.30 J/cm² @Temperature -30.0 °C |
6.19 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | IEC 60093 | ||
Surface Resistance | 3.00e+14 ohm | 3.00e+14 ohm | IEC 60093 | ||
Dielectric Constant | 3.9 @Frequency 1.00e+6 Hz |
3.9 @Frequency 1.00e+6 Hz |
IEC 60250 | ||
4.0 @Frequency 100 Hz |
4.0 @Frequency 100 Hz |
IEC 60250 | |||
Dielectric Strength | 44.0 kV/mm | 1120 kV/in | IEC 60243-1 | ||
Dissipation Factor | 0.00050 @Frequency 100 Hz |
0.00050 @Frequency 100 Hz |
IEC 60250 | ||
0.0050 @Frequency 1.00e+6 Hz |
0.0050 @Frequency 1.00e+6 Hz |
IEC 60250 | |||
Comparative Tracking Index | 600 V | 600 V | IEC 60112 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 110 µm/m-°C | 61.1 µin/in-°F | ISO 11359-1/-2 | ||
100 µm/m-°C @Temperature -40.0 - 23.0 °C |
55.6 µin/in-°F @Temperature -40.0 - 73.4 °F |
ISO 11359-1/-2 | |||
CTE, linear, Transverse to Flow | 110 µm/m-°C | 61.1 µin/in-°F | ISO 11359-1/-2 | ||
100 µm/m-°C @Temperature -40.0 - 23.0 °C |
55.6 µin/in-°F @Temperature -40.0 - 73.4 °F |
ISO 11359-1/-2 | |||
Melting Point | 178 °C | 352 °F | 10°C/min; ISO 11357-1/-3 | ||
Deflection Temperature at 0.46 MPa (66 psi) | 157 °C | 315 °F | ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 99.0 °C | 210 °F | ISO 75-1/-2 | ||
De |
|||||
Additives | Release agent | ||||
Delivery form | Pellets | ||||
Emissions | <2 mg/kg | VDA 275 | |||
Part Marking Code | >POM< | ISO 11469 | |||
Processing | Injection Moulding | ||||
Other Extrusion | |||||
Profile Extrusion | |||||
Sheet Extrusion | |||||
Regional Availability | Asia Pacific | ||||
Europe | |||||
Global | |||||
Near East/Africa | |||||
North America | |||||
South and Central America | |||||
Resin Identification | POM | ISO 1043 |
上海松翰塑化科技有限公司!本公司承诺,假一赔百!所有产品都是原厂家,原包装一线独家营销!
欢迎新老客户来电咨询;
联系人:李先生
联系电话;13636696005
联系QQ;1020580970
联系邮箱;1020580970@qq.com